Unit of competency Outline

Date retreived
22/07/2026 10:00 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply air dry and polyurethane refinishing materials

Apply air dry and polyurethane refinishing materials

Unit of competency
National Code
AURVTP012
State Code
AWZ45
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030507 - Automotive Vehicle Refinishing
Original Release Date
13/07/2016
Nominal Hours
32
Description
This unit describes the performance outcomes required to apply air dry and polyurethane refinishing materials to a variety of vehicle components by spray gun application. It involves preparing for the task, selecting and using specialist tools and equipment, mixing and applying automotive paint materials according to manufacturer specifications, and completing workplace processes and documentation.It applies to those working in the automotive paint refinishing repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to apply air dry and polyurethane refinishing materials
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Application information is accessed and interpreted
  • 1.3 Refinishing materials are selected and inspected for quality
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Tools and equipment, including personal protective equipment (PPE), are identified and checked for serviceability
  • 1.6 Work is planned to identify air dry and polyurethane refinishing method, minimise waste, and prevent damage to vehicle
2. Carry out application activities
  • 2.1 Refinishing materials are mixed and applied according to manufacturer recommended intervals and safety and environmental requirements, and without causing damage to system or components
  • 2.2 Refinishing materials are dried using approved methods and equipment
  • 2.3 Paint finish is checked against specifications
  • 2.4 Paint surface faults are removed using compounds, polishes and glazes
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and vehicle or component is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF533 AURVTP3012 Apply air dry and polyurethane enamel refinishing materials Unit of competency
Replaced By
State Code National Code Title Type
OCI90 AURVTP112 Apply air dry and polyurethane refinishing materials Unit of competency