Unit of competency Outline
Date retreived
22/07/2026 7:05 AM AWST
22/07/2026 7:05 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Implement and monitor, policies procedures for environmentally sustainable electrotech work practice
Implement and monitor, policies procedures for environmentally sustainable electrotech work practice
Unit of competency
National Code
UEENEEK045A
UEENEEK045A
State Code
W8182
W8182
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
24/09/2012
Field of Education
059999 - Agriculture, Environmental And Related Studies, N.e.c.
Original Release Date
24/09/2012
Nominal Hours
18
Description
1) 1.1) DescriptorThis Competency Standard Unit specifies the outcomes for the collecting, interpretation and application of environmental management information, the identification of environmental impacts and the assessment of risks. It also consists of monitoring while implementing environmentally sustainable work polices and plans an, the development of modifications as part of the review process.
Notes
Elements and Performance Criteria
1 Prepare/plan to implement and monitor environmentally sustainable work practice management policies and procedures
- 1.1 Works schedule(s), including drawings, plans, requirements, established procedures, and material lists, are obtained, analysed, if necessary, by site inspection and the extent of the preparation of the work determined for planning and coordination.
- 1.2 Work is prioritised and sequenced for the most efficient and effective outcome following consultation with others for completion within acceptable timeframes, to a quality standard and in accordance with established procedures.
- 1.3 Relevant requirements (including environmental regulations) and established procedures for the work are given to all personnel and identified for all work sites.
- 1.4 Hazards are identified, OHS risks assessed and control measures are prioritised, implemented and monitored to ensure safe systems of work are followed and according to established procedures.
- 1.5 Resources including personnel, equipment, tools and personal protective equipment required for the job are identified, scheduled and coordinated and confirmed in a safe and technical working order.
- 1.7 Risk management is applied to the job identifying and itemising ways in which energy wastage can be minimised
- 1.8 Items for installation are sourced, where possible, that are recycled or reusable, in consultation with and agreement of the customer.
2 Carry out the implementation and monitoring of environmentally sustainable work management policies and procedures
- 2.1 Environmentally sustainable work practice to reduce/ minimise waste and excessive energy use are implemented and monitored in accordance with requirements and/or established procedures with input being sought from specialists where possible
- 2.2 Implementation and monitoring of environmentally sustainable energy management policies and procedures are carried out, in accordance with the work schedule and requirements and/or established procedures.
- 2.3 Essential Knowledge and Associated Skills in the safe implementation and monitoring of environmental and sustainable energy management policies and procedures are applied to ensure completion in an agreed timeframe and, to quality standards with a minimum of waste according to requirements.
- 2.4 Solutions to non-routine problems are identified and actioned using acquired Essential Knowledge and Associated Skills according to requirements.
- 2.5 Ongoing checks of quality of the work are undertaken in accordance with requirements and established procedures to ensure a quality like outcome is achieved for the client/customer and to a community/industry standard.
3 Complete the implementation and monitoring of environmental and sustainable energy management policies and procedures
- 3.1 Work undertaken is checked against works schedule for conformance with requirements, anomalies reported and solutions identified in accordance with established procedures.
- 3.2 Work site is rehabilitated, cleaned up and confirmed safe in accordance with established procedures.
- 3.3 Tools, equipment and any surplus resources and materials are, where appropriate, cleaned, checked and returned to storage in accordance with established procedures.
- 3.4 Materials suitable for recycling and or reuse are identified and are stored for further use or proper disposal.
- 3.5 Policies for implementing and monitoring of sustainable work practices are reviewed and updated from the experience of the current job and new procedures implemented if required.
- 3.6 Relevant work permit(s) are signed off and the work completed/returned to service and advised to client/customer in accordance with requirements.
- 3.7 New targets for energy minimisation are set, in keeping with successful strategies
- 3.8 Successful strategies are promoted and where possible participants rewarded
No information
No information
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WC714 | UEENEEK145A | Implement and monitor energy sector environmental and sustainable policies and procedures | Unit of competency |