Unit of competency Outline
Date retreived
23/07/2026 4:59 AM AWST
23/07/2026 4:59 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Complete a basic mattress and base product
Complete a basic mattress and base product
Unit of competency
National Code
LMFMB1001B
LMFMB1001B
State Code
W8697
W8697
TGA Status
Deleted
Deleted
DTWD Status
Deleted
Deleted
State Implementation and Classification
Approved Date
30/09/2008
Field of Education
030115 - Furniture Upholstery And Renovation
Original Release Date
30/09/2008
Nominal Hours
80
Description
This unit covers the competency to construct, assemble and finish a basic mattress and base product.
Notes
Elements and Performance Criteria
1. Prepare for work
- 1.1. Work instructions are used to determine job requirements, including design variations, tolerances, process, materials, finish and quantity
- 1.2. Fabrication and assembly sequence is planned
- 1.3. Procedures are determined for checking quality at each stage of the process
- 1.4. Workplace health and safety requirements, including personal protection needs, are observed throughout the work
- 1.5. Suitable work area is selected for the task
- 1.6. Preparatory drawings/set-outs for tasks are confirmed
- 1.7. Materials are selected following work instructions
- 1.8. Tools and equipment suitable for fabrication are identified and checked for safe and effective operation
2. Complete fabrication
- 2.1. Material is prepared and set out according to work instructions and components are marked according to workplace procedures
- 2.2. Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications
- 2.3. Components are prepared and checked against set-out and job requirements
- 2.4. Components are fabricated using fastenings and adhesives
- 2.5. Assembly process is undertaken according to workplace procedures
- 2.6. Fabricated product is checked for compliance with specifications
- 2.7. Item is finished in accordance with work instructions
3. Finalise operation and maintain equipment
- 3.1. Work area is cleaned and hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures
- 3.2. Off-cuts and unused materials are collected and stored for reuse or disposed following workplace procedures
- 3.3. Waste and scrap materials are dealt with following workplace procedures
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit context
OHS requirements include legislation, building codes, material safety management systems, hazardous substances, dangerous goods codes and safe operating procedures
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Work involves reading and interpreting plans, using hand and power tools, operating basic machinery, applying quality requirements and applying product finishing techniques and materials
Work is conducted under supervision and guidance
Basic mattress product may include:
mini (dog) mattress
mattress cover
foot stool (inner spring)
headboard
mini (seat) mattress
Project is to be determined in consultation with supervisor/teacher.
Tools and equipment may include, but are not limited to:
measuring tapes or rules
cordless drills/screwdrivers
scissors
thread
needles
fabric cutter
foam cutter
staple lifters
hog ring pliers
files and rasps
trimming knife
Machines may include, but are not limited to:
sewing machines
Materials to be used may include but are not limited to:
quilted fabric
spring units
foam
springs
timber
manufactured board
border wire
hog rings
thread
needled felt
stabilising springs
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices
Information and procedures
Workplace procedures relating to the use of tools and equipment
Work instructions, including job sheets, plans, drawings and designs
Workplace procedures relating to reporting and communication
Manufacturer specifications and operational procedures
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit context
OHS requirements include legislation, building codes, material safety management systems, hazardous substances, dangerous goods codes and safe operating procedures
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Work involves reading and interpreting plans, using hand and power tools, operating basic machinery, applying quality requirements and applying product finishing techniques and materials
Work is conducted under supervision and guidance
Basic mattress product may include:
mini (dog) mattress
mattress cover
foot stool (inner spring)
headboard
mini (seat) mattress
Project is to be determined in consultation with supervisor/teacher.
Tools and equipment may include, but are not limited to:
measuring tapes or rules
cordless drills/screwdrivers
scissors
thread
needles
fabric cutter
foam cutter
staple lifters
hog ring pliers
files and rasps
trimming knife
Machines may include, but are not limited to:
sewing machines
Materials to be used may include but are not limited to:
quilted fabric
spring units
foam
springs
timber
manufactured board
border wire
hog rings
thread
needled felt
stabilising springs
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices
Information and procedures
Workplace procedures relating to the use of tools and equipment
Work instructions, including job sheets, plans, drawings and designs
Workplace procedures relating to reporting and communication
Manufacturer specifications and operational procedures
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence
Interpret work instructions and locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
achieve required product quality
Fabricate and finish at least one basic mattress and base product which requires the use of:
quilted fabric
mattress-making hand tools and equipment
springs or a spring unit
sewing machines
Work effectively with others
Resource implications
Access to plans, tools, equipment, materials, a work area and a specified project.
Method of assessment
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment may be conducted in conjunction with assessment of other units of competency.
Context of assessment
Assessment may occur on the job or in a workplace simulated facility with relevant equipment, materials, work instructions and deadlines.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence
Interpret work instructions and locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
achieve required product quality
Fabricate and finish at least one basic mattress and base product which requires the use of:
quilted fabric
mattress-making hand tools and equipment
springs or a spring unit
sewing machines
Work effectively with others
Resource implications
Access to plans, tools, equipment, materials, a work area and a specified project.
Method of assessment
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment may be conducted in conjunction with assessment of other units of competency.
Context of assessment
Assessment may occur on the job or in a workplace simulated facility with relevant equipment, materials, work instructions and deadlines.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W0341 | LMFMB1001A | Complete a basic mattress and base product | Unit of competency |
