Unit of competency Outline

Date retreived
22/07/2026 12:47 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform advanced equipment testing and diagnostics on mobile plant and equipment

Perform advanced equipment testing and diagnostics on mobile plant and equipment

Unit of competency
National Code
MEM27033
State Code
OAT05
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
26/06/2019
View on TGA
State Implementation and Classification
Approved Date
Field of Education
031317 - Electronic Equipment Servicing
Original Release Date
Nominal Hours
72
Description
This unit of competency defines the skills and knowledge required to obtain and interpret information to diagnose mobile plant and equipment faults, determine the cause, and make recommendations, and includes the use of electronic and analog diagnostic tools.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: BUnit Weight: 8
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Obtain information on mobile plant and equipment performance
  • 2.1 Access and interpret job-related information and use information management systems to access data on plant and equipment performance
  • 2.2 Review previous service records to access data on plant and equipment performance
  • 2.3 Review equipment systems operation, testing and adjusting procedure and identify troubleshooting procedure
  • 2.4 Identify hazards associated with plant and equipment tests
3 Identify equipment fault/s
  • 3.1 Interpret data from information management system and determine fault symptoms, including carrying out a visual inspection on equipment operation
  • 3.2 Install all test equipment at the correct test point locations and conduct performance tests, as required
  • 3.3 Analyse information from tests and test equipment and identify fault
  • 3.4 Plot data and record on performance analysis report forms
4 Determine cause of fault/s and make recommendations
  • 4.1 Identify possible causes and conduct diagnostic tests to confirm cause
  • 4.2 Analyse test result and compare with specifications
  • 4.3 Locate cause of fault and document
  • 4.4 Make recommendations for repair and implement rectification strategy
5 Check and document repairs
  • 5.1 Check repairs for completion
  • 5.2 Re-test equipment to ensure compliance
  • 5.3 Prepare and complete service report and complete required documentation in accordance with procedures
No information
No information
Replaces
State Code National Code Title Type
W5620 MEM18073A Perform advanced equipment testing and diagnostics on mobile plant and equipment Unit of competency
State Code National Code Title Type
BEK0 MEM50119 Diploma of Engineering - Advanced Trade Qualification