Unit of competency Outline

Date retreived
22/07/2026 10:02 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Trim and cut felled trees

Trim and cut felled trees

Unit of competency
National Code
FWPCOT2239
State Code
AXL63
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
3.00
Current Release Date
31/01/2020
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
050501 - Forestry Studies
Original Release Date
05/10/2016
Nominal Hours
40
Description
This unit describes the outcomes required to trim and cut felled trees with a chainsaw and to complete operator maintenance. It applies to situations where the production of timber is not the primary focus of the activity. The unit applies to a forestry worker, chainsaw operator, forest harvester, harvesting technician and arboriculture worker.No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for trimming and cutting
  • 1.1 Review work order and where required check with appropriate personnel
  • 1.2 Select appropriate personal protective and other equipment and check for operational effectiveness
  • 1.3 Plan trimming and cutting activities in line with work order and environmental conditions
2. Visually assess felled trees
  • 2.1 Assess tree location and stability for conditions likely to affect safety of trimming and cutting activities
  • 2.2 Visually assess tree for defects and identify stresses within tree
  • 2.3 Mark trees too dangerous to cut safely and refer to appropriate personnel
3. Plan cutting
  • 3.1 Move or stabilise tree for safe cutting in line with site procedures
  • 3.2 Select cutting pattern to optimise time and manageable removal of sections
  • 3.3 Identify options for utilisation of product
  • 3.4 Plan cutting sequence to maintain control of cut sections and minimise cutting problems
  • 3.5 Select cutting positions considering tree stresses
  • 3.6 Clear debris from work area to allow safe access and prevent saw damage and personal injury
4. Use chainsaw to trim and cut trees
  • 4.1 Monitor location and movement of other personnel and modify work to ensure safety
  • 4.2 Establish and maintain communication to ensure safety
  • 4.3 Secure tree section on each side of planned cut; evaluate and control potential movement
  • 4.4 Operate chainsaw to cut tree and limbs and adjust cutting technique in response to movement and condition of tree and limbs
  • 4.5 Prepare cut sections for removal from the site
5. Complete equipment maintenance
  • 5.1 Follow organisational safety procedures to lock out equipment
  • 5.2 Check chain for bluntness or damage
  • 5.3 Remove, sharpen, adjust and replace chain and other components in line with manufacturer recommendations
  • 5.4 Record and report trimming and cutting records, equipment faults and maintenance requirements to appropriate personnel
No information
No information
Replaces
State Code National Code Title Type
D3827 FPICOT2239A Trim and cut felled trees Unit of competency
Replaced By
State Code National Code Title Type
ODK02 FWPCOT2256 Trim and cut felled trees Unit of competency