Unit of competency Outline

Date retreived
22/07/2026 5:31 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Trim and cut felled trees

Trim and cut felled trees

Unit of competency
National Code
FWPCOT2256
State Code
ODK02
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
29/04/2021
View on TGA
State Implementation and Classification
Approved Date
07/04/2021
Field of Education
050501 - Forestry Studies
Original Release Date
07/04/2021
Nominal Hours
40
Description
This unit describes the skills and knowledge required to trim and cut felled trees with a chainsaw and complete operator maintenance. The unit applies to individuals who trim and cut felled trees as part of arboriculture, forestry, agriculture, conservation and land management, local government, emergency services and other government agency operations. With the exception of minor forest produce, this unit does not apply to commercial harvesting operations.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation, standards and industry codes of practice that apply to the workplace.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for trimming and cutting felled trees
  • 1.1 Determine job requirements from work order or instruction and, where required, seek clarification from appropriate personnel
  • 1.2 Confirm safety and environmental requirements for the task according to workplace procedures
  • 1.3 Identify, assess and take actions to mitigate risks and hazards associated with trimming and cutting felled trees
  • 1.4 Plan trimming and cutting activities according to work order or instruction and environmental conditions
  • 1.5 Consult and maintain communication with team members and other appropriate personnel to ensure that work is coordinated effectively with others in the workplace
  • 1.6 Obtain tools and equipment needed for the work, and check for correct operation and safety
  • 1.7 Select, fit and use personal protective equipment
2. Assess felled trees visually
  • 2.1 Inspect site for conditions likely to affect safe implementation of trimming and cutting activities
  • 2.2 Identify and report site environmental conditions to supervisor
  • 2.3 Assess felled tree visually to identify defects and stresses within felled tree
  • 2.4 Mark felled trees too dangerous to cut safely, and refer to appropriate personnel
3. Plan cutting felled trees
  • 3.1 Move or stabilise felled tree for safe cutting according to workplace procedures
  • 3.2 Select cutting pattern to optimise time and ensure efficient removal of sections
  • 3.3 Identify options for utilisation of product
  • 3.4 Plan cutting sequence to maintain control of cut sections and minimise cutting problems
  • 3.5 Select cutting positions, considering felled tree stresses
  • 3.6 Clear debris from work area to allow safe access and prevent saw damage and personal injury
4. Use chainsaw to trim and cut felled trees
  • 4.1 Monitor location and movement of other personnel, and modify work to ensure safety
  • 4.2 Establish and maintain communication with team members to ensure safety
  • 4.3 Secure felled tree section on each side of planned cut as required, and evaluate and control potential movement
  • 4.4 Operate chainsaw to cut felled tree and limbs, and adjust cutting technique in response to movement and condition of felled tree and limbs
  • 4.5 Apply retrieval techniques for stuck, pinched or jammed part of chainsaws
  • 4.6 Prepare cut sections for removal from site
5. Complete equipment maintenance
  • 5.1 Follow workplace safety procedures and manufacturer instructions to lock out equipment
  • 5.2 Check chain for bluntness or damage
  • 5.3 Remove, sharpen, adjust or replace chain and other components according to manufacturer recommendations
  • 5.4 Report trimming and cutting records, equipment faults and maintenance requirements to appropriate personnel
No information
No information
Replaces
State Code National Code Title Type
AXL63 FWPCOT2239 Trim and cut felled trees Unit of competency
Replaced By
State Code National Code Title Type
OFD24 FWPCOT2273 Trim and cut felled trees Unit of competency