Unit of competency Outline

Date retreived
23/07/2026 4:44 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Manually produce basic screen prints

Manually produce basic screen prints

Unit of competency
National Code
ICPSCP2710
State Code
OBQ52
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
06/05/2020
View on TGA
State Implementation and Classification
Approved Date
20/08/2020
Field of Education
030103 - Printing
Original Release Date
20/08/2020
Nominal Hours
30
Description
This unit describes the skills and knowledge required to manually produce one or two colour screen prints in short runs or limited art prints.It applies to individuals working under direct supervision and performing mainly routine tasks such as monitoring equipment, selecting appropriate products and ensuring enterprise processes and procedures are followed.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Load substrate
  • 1.1 Check substrate against job specifications and report and rectify, within scope of own role, any irregularities
  • 1.2 Adjust substrate position and stencil registration according to job specifications
  • 1.3 Apply ink to screen according to job specifications
2. Prepare for production
  • 2.1 Run off proof print and check for colour, strength, registration, adhesion, clarity, gloss level, drying or curing, artwork detail and other technical aspects according to job specifications
  • 2.2 Make adjustments as required
  • 2.3 Seek required approval to commence production prior to commencement
  • 2.4 Set belt speed and energy required to achieve required curing or drying properties
3. Run job and monitor print quality
  • 3.1 Adjust printing speed production to maximise quality and output
  • 3.2 Monitor, evaluate and adjust print quality as required
  • 3.3 Monitor effects of ink alterations during run and report any discrepancies according to enterprise procedures
  • 3.4 Complete required workplace documentation
  • 3.5 Monitor and adjust curing and drying according to manufacturer and job specifications
4. Stack production output
  • 4.1 Check output for thorough drying or curing prior to stacking
  • 4.2 Check job status and progress against job specifications and take action as required
5. Finish operation
  • 5.1 Identify and report fault conditions according to enterprise procedures
  • 5.2 Remove and clean excess ink, screens, squeegees and flood coaters according to work health and safety (WHS) requirements and manufacturer specifications
  • 5.3 Dispose of waste materials according to manufacturer specifications, regulatory requirements and enterprise procedures
  • 5.4 Clean equipment and surrounding areas according to manufacturer specifications and enterprise procedures
No information
No information
Replaces
State Code National Code Title Type
AUP24 ICPSCP271 Manually produce basic screen prints Unit of competency
State Code National Code Title Type
BFB8 ICP31220 Certificate III in Printing Qualification
BFC3 ICP20120 Certificate II in Printing and Graphic Arts Qualification