Unit of competency Outline

Date retreived
22/07/2026 11:13 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Prepare materials for fabrication using manual processes

Prepare materials for fabrication using manual processes

Unit of competency
National Code
AUMGTS002
State Code
WH971
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Field of Education
030509 - Automotive Body Construction
Original Release Date
11/03/2014
Nominal Hours
36
Description
This unit describes the performance outcomes required to identify and prepare materials for fabrication using manual processes.It applies to those in an automotive manufacturing environment and involves the application of skills and knowledge at a specialist levelNo licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare
  • 1.1 Workplace procedures are identified and followed
  • 1.2 Job specifications, working drawings and calculations are identified and interpreted
  • 1.3 Tools, equipment and resources are selected and inspected, and faults reported
2. Select fabrication materials
  • 2.1 Fabrication materials are identified and prepared according to job specifications and working drawings
  • 2.2 Defective materials are set aside for scrap or rework
3. Bend, shape and fabricate material
  • 3.1 Bending, shaping and fabricating processes are applied according to job specifications and working drawings
  • 3.2 Material distortion prevention measures are identified and applied according to job requirements
  • 3.3 Bent, shaped and fabricated materials are checked against job specifications or working drawings
4. Complete the job
  • 4.1 Work area is cleaned, and materials disposed of or recycled according to workplace procedures
  • 4.2 Tools and equipment are cleaned, checked and stored according to workplace procedures
  • 4.3 Faulty equipment is tagged and reported
  • 4.4 Work sheets are completed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WE171 AUMGTS3002 Prepare materials for fabrication using manual processes Unit of competency