Unit of competency Outline

Date retreived
22/07/2026 10:16 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate pressurised irrigation systems

Operate pressurised irrigation systems

Unit of competency
National Code
AHCIRG332
State Code
BAR05
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
27/06/2016
View on TGA
State Implementation and Classification
Approved Date
12/01/2017
Field of Education
030717 - Plant And Machine Operations
Original Release Date
12/01/2017
Nominal Hours
45
Description
This unit of competency covers the skills and knowledge required to operate low volume and sprinkler irrigation systems.It applies to individuals who take responsibility for own work and for the quality of the work of others. They use discretion and judgement in the selection, allocation and use of available resources. All work is carried out to comply with workplace procedures.No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Carry out pre-start checks
  • 1.1 Determine work requirements and identify hazards, assess risks and implement control measures
  • 1.2 Select required tools and equipment and check for safe operation
  • 1.3 Select and use suitable personal protective equipment
  • 1.4 Check water, power, fuel and lubricants to confirm all are available and the control system is operational
  • 1.5 Prime pumps, if necessary, and open or close valves and controls as directed
  • 1.6 Calibrate pressure and flow testing equipment
  • 1.7 Carry out other pre-start system checks
2. Inspect and operate the system
  • 2.1 Implement start up sequence
  • 2.2 Check emitter spacing against the irrigation plan
  • 2.3 Adjust water pressure as required
  • 2.4 Keep filters clear and replace as required
  • 2.5 Correct or repair all malfunctions, leaks and blockages and report
3. Monitor irrigation system performance
  • 3.1 Check emitters for output
  • 3.2 Calculate application rate of water
  • 3.3 Check the water distribution pattern in the irrigated area
  • 3.4 Monitor moisture levels in the root zone
  • 3.5 Minimise environmental impacts of the operation
4. Shut down irrigation system
  • 4.1 Apply water for sufficient time to achieve required soil moisture levels and allowing for weather conditions
  • 4.2 Shut down system components and drain
  • 4.3 Record and report irrigation activities
No information
No information
Replaces
State Code National Code Title Type
D6876 AHCIRG305A Operate pressurised irrigation systems Unit of competency
Replaced By
State Code National Code Title Type
OBJ83 AHCIRG346 Operate pressurised irrigation systems Unit of competency