Unit of competency Outline

Date retreived
22/07/2026 7:44 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate basic lighting

Operate basic lighting

Unit of competency
National Code
CUALGT301
State Code
WI128
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
15/01/2016
View on TGA
State Implementation and Classification
Approved Date
16/05/2014
Field of Education
031301 - Electrical Engineering
Original Release Date
16/05/2014
Nominal Hours
25
Description
This unit describes the performance outcomes, skills and knowledge required to plot, record, modify and operate standard lighting cues on lighting consoles typically used in small-scale productions and events.At this level, individuals are required to use some discretion and judgement and operate under broad supervision within an established framework of plans and procedures.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for lighting operations
  • 1.1 In consultation with relevant personnel, clarify scope of own role in lighting operations
  • 1.2 Ensure that working area is clear and properly illuminated, that relevant documentation is easily accessible, and that communication equipment is ready for use
  • 1.3 Power up dimmers, control desk and control desk peripherals using safe work practices
  • 1.4 Perform lamp checks and test functionality and safety of venue lighting
  • 1.5 Test lights and accessories and other lighting elements to ensure all items are in working order
2. Plot and operate lighting cues
  • 2.1 Test line of sight needed for visual cues for feasibility during performance
  • 2.2 Follow standard procedures to record cues in line with instructions and within agreed timeframes
  • 2.3 Play and time groups and sub-groups of recorded cues in correct sequence
  • 2.4 Document recorded lighting cues in an appropriate format and make a hard or electronic backup copy of recorded information
  • 2.5 Modify cues according to instructions and update documentation
  • 2.6 Establish suitable backup lighting states to be used if recorded cues fail to operate
  • 2.7 Check channel inputs and outputs for continuity and patching
  • 2.8 Action cues during shows in line with directions and production requirements
3. Conduct basic troubleshooting
  • 3.1 Identify problems with equipment promptly and take appropriate action, or refer to relevant personnel as required
  • 3.2 Assess the need for remedial action, taking into consideration safety issues and the need for minimal disruption to performances
  • 3.3 Follow manufacturer’s diagnostic and remedial procedures as required
  • 3.4 Liaise with relevant personnel to identify backup alternatives if faults cannot be rectified before next production deadline
4. Complete post-show procedures
  • 4.1 Seek clearance to execute power down and disassemble equipment safely
  • 4.2 Pack and store equipment and accessories according to safety regulations and production requirements
  • 4.3 Check hired equipment against inventory before packing and report lost or damaged equipment to relevant personnel
  • 4.4 Pack lighting equipment for transit as required
  • 4.5 Clean work environment after use and restore environment to previous condition
  • 4.6 Seek feedback from relevant personnel on own work performance and note areas for improvement
No information
No information
Replaced By
State Code National Code Title Type
ODI20 CUALGT311 Operate basic lighting Unit of competency