Unit of competency Outline

Date retreived
22/07/2026 1:00 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate basic lighting

Operate basic lighting

Unit of competency
National Code
CUALGT311
State Code
ODI20
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
16/04/2021
View on TGA
State Implementation and Classification
Approved Date
26/11/2021
Field of Education
031301 - Electrical Engineering
Original Release Date
26/11/2021
Nominal Hours
25
Description
This unit describes the skills and knowledge required to plot, record, modify and operate standard lighting cues on lighting consoles typically used in small-scale productions and events. It involves preparation, operation, and basic troubleshooting of lighting operations.The unit applies to those who carry out basic lighting operations with some discretion and judgement and requires broad supervision within an established framework of plans and procedures. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for lighting operations
  • 1.1 Confirm individual responsibilities with required personnel
  • 1.2 Check that working area is clear and properly illuminated
  • 1.3 Prepare required documentation and equipment
  • 1.4 Power up materials using safe work practices
  • 1.5 Test functionality and safety of venue lighting
  • 1.6 Test lights and accessories to confirm all items are in working order
2. Plot and operate lighting cues
  • 2.1 Test line of sight needed for visual cues during performance
  • 2.2 Follow standard procedures to record cues as required
  • 2.3 Play and time recorded cues in correct sequence
  • 2.4 Document recorded lighting as required
  • 2.5 Make a hard or electronic backup copy of recorded information
  • 2.6 Modify cues according to instructions and update documentation as required
  • 2.7 Establish suitable backup lighting states
  • 2.8 Check channel inputs and outputs
  • 2.9 Action cues during shows according to production requirements
3. Conduct basic troubleshooting
  • 3.1 Identify problems with equipment promptly and take action as required
  • 3.2 Liaise with required personnel to identify alternatives if faults cannot be rectified before next production deadline
4. Complete post-show procedures
  • 4.1 Liaise with required personnel to power down and disassemble equipment
  • 4.2 Check hired equipment against inventory before packing
  • 4.3 Pack equipment and accessories according to safety regulations and production requirements
  • 4.4 Report lost or damaged equipment to required personnel
  • 4.5 Clean work environment after use
  • 4.6 Seek feedback from required personnel on own performance
No information
No information
Replaces
State Code National Code Title Type
WI128 CUALGT301 Operate basic lighting Unit of competency