Unit of competency Outline

Date retreived
22/07/2026 6:02 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install aerial cable for communications applications

Install aerial cable for communications applications

Unit of competency
National Code
ICTCBL333
State Code
OBA55
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
30/08/2019
View on TGA
State Implementation and Classification
Approved Date
27/11/2019
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
27/11/2019
Nominal Hours
35
Description
This unit describes the skills and knowledge required to install aerial cable in domestic, commercial or industrial communications applications that include digital and analog, telephony, data, video, digital broadcasting, computer networks, local area networks (LANs), wide area networks (WANs), master antenna television (MATV), cable television (CATV), closed-circuit television (CCTV), long-term evolution (LTE) and multimedia. It applies to technical staff installing aerial cable for customer and carrier networks. Installations are completed outdoors on customer premises using basic rigging procedures, methods and equipment for working safely at heights.Licensing, legislative, regulatory and certification requirements apply to telecommunications systems. Work functions in the occupational areas where this unit may be used are subject to regulatory requirements. All customer cabling work in the telecommunications, fire, security and data industries must be performed by a registered cabler. All cablers are required to register with an Australian Communications and Media Authority (ACMA) accredited registrar. Refer to the ICT Information and Communications Technology Training Package Companion Volume Implementation Guide or the relevant regulator for specific guidance on requirements.
Notes
Elements and Performance Criteria
1. Prepare for aerial cable installation
  • 1.1 Access site according to required procedures
  • 1.2 Verify location, cable bearer type and specific requirements of the proposed aerial cable installation according to appropriate plans and recognised constraints
  • 1.3 Obtain information about location of other services from relevant authorities
  • 1.4 Inform appropriate personnel of existing and potential worksite hazards
  • 1.5 Select tools and equipment required for safe work practice
  • 1.6 Erect barriers according to safety requirements
  • 1.7 Assess support structure safety according to standard working conditions and proceed according to this assessment
  • 1.8 Identify and set up traffic management plan as required
  • 1.9 Set-up cable installation equipment according to manufacturer requirements and enterprise guidelines
2. Attach aerial cable to catenary
  • 2.1 Select type of cable bearer
  • 2.2 Use basic rigging procedures, methods and equipment for working safely at heights
  • 2.3 Secure pole hardware permanently to support structure using safe installation practices, according to specifications
  • 2.4 Haul and secure cable following health and safety requirements, manufacturer specifications and environmental requirements
  • 2.5 Ensure minimum sag heights are achieved
3.Install self-supporting aerial cable
  • 3.1 Select type of cable for installation
  • 3.2 Use basic rigging procedures, methods and equipment for working safely at heights
  • 3.3 Secure pole hardware permanently to support structure using safe installation practices according to specifications
  • 3.4 Haul and secure cable following health and safety requirements, manufacturer specifications and environmental requirements
  • 3.5 Ensure minimum sag heights are achieved
4. Seal and secure aerial cable
  • 4.1 Seal cable ends to prevent entrance of foreign material
  • 4.2 Secure cable loop, as required, on support structure and ensure equipment is left in a tidy manner to reduce damage to conductors or fibres and to enable ease of access for effective maintenance
  • 4.3 Weatherproof building entry points, as required
  • 4.4 Fit over-voltage protection devices to all cables with metallic component as required
  • 4.5 Complete installation reports and design amendments accurately and file promptly according to industry requirements
5. Restore site and complete documentation
  • 5.1 Restore worksite to customer satisfaction
  • 5.2 Complete reports on installation work and provide to appropriate personnel
  • 5.3 Notify customer and obtain sign-off
No information
No information
Replaces
State Code National Code Title Type
AWE72 ICTCBL310 Install aerial cable Unit of competency