Unit of competency Outline

Date retreived
23/07/2026 1:29 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install aerial cable

Install aerial cable

Unit of competency
National Code
ICTCBL310
State Code
AWE72
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
14/01/2016
View on TGA
State Implementation and Classification
Approved Date
05/07/2016
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
05/07/2016
Nominal Hours
60
Description
This unit describes the skills and knowledge required to install aerial cable in domestic, commercial or industrial communications applications that include digital and analog, telephony, data, video, digital broadcasting, computer networks, local area networks (LAN), wide area networks (WAN), master antenna television (MATV), cable television (CATV), closed-circuit television (CCTV), long term evolution (LTE) and multimedia. It applies to technical staff installing aerial cable for client and carrier networks. Installations are completed outdoors on a client's premises using basic rigging procedures, methods and equipment for working safely at heights.Work functions in the occupational areas where this unit may be used are subject to regulatory requirements. Refer to the Implementation Guide Companion Volume or the relevant regulator for specific guidance on requirements.
Notes
Elements and Performance Criteria
1. Prepare for aerial cable installation
  • 1.1 Prepare for given work according to relevant legislation, codes, regulations and standards
  • 1.2 Arrange access to site according to required procedure
  • 1.3 Verify location of proposed aerial cable installation requirements according to appropriate plans and recognise constraints
  • 1.4 Obtain information on location of other services from relevant authorities
  • 1.5 Inform appropriate personnel of existing and potential hazards on worksite
  • 1.6 Select tools and equipment required for safe work practice
  • 1.7 Erect barriers according to safety requirements
  • 1.8 Assess support structure as safe for normal working conditions
  • 1.9 Set up cable installation equipment according to manufacturer’s requirements and enterprise guidelines
2. Attach aerial cable to catenary
  • 2.1 Select type of cable bearer for catenary wire or integral bearer installation
  • 2.2 Use basic rigging procedures, methods and equipment for working safely at heights
  • 2.3 Secure catenary wire or integral bearer wire permanently to support structure using safe installation practices according to specifications
  • 2.4 Haul and secure cable to catenary wire following health and safety and environmental requirements
  • 2.5 Ensure minimum sag heights are achieved in accordance with Australian Communications and Media Authority (ACMA) and Australian Standards
3. Seal and secure aerial cable
  • 3.1 Seal cable ends to prevent ingress of foreign material
  • 3.2 Secure cable loop, if required, on support structure to reduce damage to conductors or fibres and to enable ease of access for maintenance
  • 3.3 Weather seal building entry points where appropriate
  • 3.4 Fit over-voltage protection devices to all cables with metallic component where required
  • 3.5 Complete reports on installation and design amendments accurately and file promptly according to enterprise requirements
4. Restore site and complete documentation
  • 4.1 Restore worksite to client’s satisfaction
  • 4.2 Complete reports on installation
  • 4.3 Notify client and obtain sign off
No information
No information
Replaces
State Code National Code Title Type
D3327 ICTCBL3021A Install aerial cable Unit of competency
Replaced By
State Code National Code Title Type
OBA55 ICTCBL333 Install aerial cable for communications applications Unit of competency