Unit of competency Outline
Date retreived
22/07/2026 7:37 AM AWST
22/07/2026 7:37 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Skirt and weigh fellmongered wool
Skirt and weigh fellmongered wool
Unit of competency
National Code
MTMP2167C
MTMP2167C
State Code
D8882
D8882
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
Field of Education
050103 - Wool Science
Original Release Date
Nominal Hours
20
Description
This unit covers the skills and knowledge required to skirt and weigh fellmongered wool.
Notes
Elements and Performance Criteria
1. Skirt pulled fleeces
- 1.1. Fleeces are skirted in accordance with OH&S and workplace requirements.
- 1.2. Skirtings are segregated in accordance with classer's instructions.
- 1.3. Skirtings are stored in accordance with workplace requirements.
- 1.4. Large skin pieces are sheared, where required.
- 1.5. Mob separation of fleece wool is maintained.
- 1.6. Sample fleeces are selected and dried where required.
2. Weigh fleeces
- 2.1. Fleeces are weighed and results recorded, where required.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
OH&S requirements may include:
enterprise OH&S policies, procedures and programs
OH&S legal requirements
personal protective equipment (PPE):
coats and aprons
ear plugs or muffs
eye and facial protection
head-wear
lifting assistance
mesh aprons
protective boot covers
protective hand and arm covering
protective head and hair covering
uniforms
waterproof clothing
work, safety or waterproof footwear
requirements set out in standards and codes of practice.
Workplace requirements may include:
enterprise-specific requirements
OH&S requirements
QA requirements
Standard Operating Procedures (SOPs)
the ability to perform the task to production requirements
work instructions.
Regulatory requirements may include:
hygiene and sanitation requirements
relevant regulations.
Communication skills may include:
applying numeracy skills to workplace requirements
listening and understanding
reading and interpreting workplace-related documentation
sharing information
speaking clearly and directly
working with diverse individuals and groups.
Safety procedures may include:
accident prevention
electrical fault procedures
emergency evacuation procedures
emergency procedures in case of injury
equipment malfunction procedures
hand and arm protection.
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
OH&S requirements may include:
enterprise OH&S policies, procedures and programs
OH&S legal requirements
personal protective equipment (PPE):
coats and aprons
ear plugs or muffs
eye and facial protection
head-wear
lifting assistance
mesh aprons
protective boot covers
protective hand and arm covering
protective head and hair covering
uniforms
waterproof clothing
work, safety or waterproof footwear
requirements set out in standards and codes of practice.
Workplace requirements may include:
enterprise-specific requirements
OH&S requirements
QA requirements
Standard Operating Procedures (SOPs)
the ability to perform the task to production requirements
work instructions.
Regulatory requirements may include:
hygiene and sanitation requirements
relevant regulations.
Communication skills may include:
applying numeracy skills to workplace requirements
listening and understanding
reading and interpreting workplace-related documentation
sharing information
speaking clearly and directly
working with diverse individuals and groups.
Safety procedures may include:
accident prevention
electrical fault procedures
emergency evacuation procedures
emergency procedures in case of injury
equipment malfunction procedures
hand and arm protection.
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
The meat industry has specific and clear requirements for evidence. A minimum of three forms of evidence is required to demonstrate competency in the meat industry. This is specifically designed to provide evidence that covers the demonstration in the workplace of all aspects of competency over time.
These requirements are in addition to the requirements for valid, current, authentic and sufficient evidence.
Three forms of evidence means three different kinds of evidence - not three pieces of the same kind. In practice it will mean that most of the unit is covered twice. This increases the legitimacy of the evidence.
All assessment must be conducted against Australian meat industry standards and regulations.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Competency must be demonstrated at the normal rate of throughput.
Context of, and specific resources for assessment
Assessment must be conducted in an operating fellmongery plant.
Method of assessment
Recommended methods of assessment include:
quiz of underpinning knowledge
workplace demonstration
workplace referee or third-party report of performance over time.
Assessment practices should take into account any relevant language or cultural issues related to Aboriginality or Torres Strait Islander, gender, or language backgrounds other than English. Language and literacy demands of the assessment task should not be higher than those of the work role.
Guidance information for assessment
A current list of resources for this Unit of Competency is available from MINTRAC www.mintrac.com.au or telephone 1800 817 462.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
The meat industry has specific and clear requirements for evidence. A minimum of three forms of evidence is required to demonstrate competency in the meat industry. This is specifically designed to provide evidence that covers the demonstration in the workplace of all aspects of competency over time.
These requirements are in addition to the requirements for valid, current, authentic and sufficient evidence.
Three forms of evidence means three different kinds of evidence - not three pieces of the same kind. In practice it will mean that most of the unit is covered twice. This increases the legitimacy of the evidence.
All assessment must be conducted against Australian meat industry standards and regulations.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Competency must be demonstrated at the normal rate of throughput.
Context of, and specific resources for assessment
Assessment must be conducted in an operating fellmongery plant.
Method of assessment
Recommended methods of assessment include:
quiz of underpinning knowledge
workplace demonstration
workplace referee or third-party report of performance over time.
Assessment practices should take into account any relevant language or cultural issues related to Aboriginality or Torres Strait Islander, gender, or language backgrounds other than English. Language and literacy demands of the assessment task should not be higher than those of the work role.
Guidance information for assessment
A current list of resources for this Unit of Competency is available from MINTRAC www.mintrac.com.au or telephone 1800 817 462.
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAZ63 | AMPA2147 | Skirt and weigh fellmongered wool | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| D595 | MTM20111 | Certificate II in Meat Processing (Abattoirs) | Qualification |