Unit of competency Outline

Date retreived
23/07/2026 12:56 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use basic artwork framing techniques

Use basic artwork framing techniques

Unit of competency
National Code
MSFFP2013
State Code
OEJ85
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
08/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
19/04/2023
Nominal Hours
80
Description
This unit describes the skills and knowledge required to use basic artwork framing techniques. It includes the use of a limited range of tools, equipment and framing techniques. Learners with his competency have basic skills to support further study or entry-level work. This unit is usually delivered within a pre-employment training program.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1 Identify framing requirements
  • 1.1 Identify framing requirements from spoken or written work instructions
  • 1.2 Identify key steps in framing process
  • 1.3 Identify and follow work health safety requirements
2 Cut and join mouldings
  • 2.1 Select tools and equipment to cut and join mouldings and check that they are safe and functional.
  • 2.2. Check that moulding materials meet task quality requirements.
  • 2.3 Set out material for cutting to length in accordance with task requirements and workplace procedures
  • 2.4 Use tools and equipment in accordance with safety requirements and manufacturer specifications
  • 2.5 Cut mouldings to length and check for quality and fit in accordance with workplace practices
  • 2.6 Lay out components and fix in preparation for joining according to work instructions and workplace procedures
  • 2.7 Join components and check for quality, alignment and finish in accordance with workplace practices
3 Cut mat board
  • 3.1 Select tools and equipment required for cutting mat board and check they are safe and functional
  • 3.2 Check that mat board material meets task quality requirements
  • 3.3 Set out mat board material for cutting in accordance with task requirements and workplace procedures
  • 3.4 Use tools and equipment in accordance with safety requirements and manufacturer specifications
  • 3.5 Cut mat boards check for quality in accordance with workplace practices
4 Cut glass for framing
  • 4.1 Select tools and equipment for cutting glass and check that they are safe and functional
  • 4.2 Check that glass meets task requirements
  • 4.3 Set out glass for cutting in accordance with task requirements and workplace procedures
  • 4.4 Use tools and equipment in accordance with safety requirements and manufacturer specifications
  • 4.5 Cut glass and check for quality in accordance with workplace practices
5 Mount artwork
  • 5.1 Determine method of mounting to meet task requirements
  • 5.2 Set up mounting equipment in accordance with equipment instructions and workplace procedures
  • 5.3 Position artwork on substrate and place in mounting equipment in accordance with task requirements
  • 5.4 Operate mounting equipment in accordance with manufacturer instructions and workplace procedures
  • 5.5 Remove assembled artwork from equipment and inspect for quality in accordance with workplace procedures
6 Assemble artwork package
  • 6.1 Clean fabricated components and lay out for assembly in accordance with workplace procedures
  • 6.2 Attach artwork to backing material using selected method
  • 6.3 Assemble and adjust frame components to fit and fix in place
  • 6.4 Fit frame over package and fix backing securely
  • 6.5 Attach fittings, attachments and hanging aids appropriate for artwork
  • 6.6 Inspect package for quality and process in accordance with workplace procedures
7 Complete task
  • 7.1 Check, clean and store equipment and any unused materials in accordance with workplace procedures
  • 7.2 Clean work area, safely dispose of waste and identify items for recycling in accordance with workplace procedures and environmental standards
  • 7.3 Complete required workplace records
No information
No information
Replaces
State Code National Code Title Type
WI579 MSFPF1001 Frame a simple artwork Unit of competency