Unit of competency Outline

Date retreived
22/07/2026 8:31 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Frame a simple artwork

Frame a simple artwork

Unit of competency
National Code
MSFPF1001
State Code
WI579
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
19/06/2014
Nominal Hours
80
Description
This unit of competency covers designing, fabricating components and assembling a simple artwork package. It applies to a VET in Schools or pre-vocational program for new entrants to the furnishing industry. Tools and equipment should be used under supervision.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Design artwork package
  • 1.1 Artwork to be framed is identified and its qualities and framing requirements assessed
  • 1.2 A provisional design package is developed
  • 1.3 Design is modified as required and approved in accordance with workplace procedures
  • 1.4 Work sequence is planned to suit the job
2 Cut and join mouldings
  • 2.1 Work health safety (WHS) requirements, including personal protection needs, are observed throughout the work
  • 2.2 Tools, equipment and materials required for cutting and joining of mouldings are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety
  • 2.3 Material is set out for cutting to length according to work instructions and workplace procedures
  • 2.4 Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications
  • 2.5 Mouldings are cut to length and checked for quality and fit in accordance with workplace practices
  • 2.6 Components are laid out and fixed in preparation for joining according to work instructions and workplace procedures
  • 2.7 Components are joined and checked for quality, alignment and finish according to workplace practices
3 Cut mat board
  • 3.1 Tools, equipment and materials required for cutting mat board are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety
  • 3.2 Mat board material is set out for cutting according to work instructions and workplace procedures
  • 3.3 Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications
  • 3.4 Mat boards are cut and checked for quality in accordance with workplace practices
4 Cut glass for framing
  • 4.1 Tools, equipment and materials required for cutting glass are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety
  • 4.2 Glass is set out for cutting according to work instructions and workplace procedures
  • 4.3 Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications
  • 4.3 Glass is cut and checked for quality in accordance with workplace practices
5 Mount artwork
  • 5.1 Method of mounting is determined
  • 5.2 Mounting equipment is set up according to operating procedures and workplace practice
  • 5.3 Artwork is positioned on substrate according to job requirements and placed in mounting equipment
  • 5.4 Mounting equipment is operated in accordance with manufacturer instructions and workplace procedures
  • 5.5 Assembled artwork is removed from equipment, inspected for quality in accordance with workplace procedures
6 Assemble artwork package
  • 6.1 Fabricated components are cleaned and laid out for assembly in accordance with workplace procedures
  • 6.2 Artwork is attached to backing material using the selected method
  • 6.3 Frame components are assembled and adjusted, as required, to fit and fixed in place
  • 6.4 Frame is fitted over package and the backing is fixed in accordance with workplace procedures
  • 6.5 Fittings, attachments and hanging aids are attached in accordance with workplace procedures
  • 6.6 Package is inspected for quality and processed in accordance with workplace procedures
7 Complete work
  • 7.1 Work area is cleaned, hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures
  • 7.2 Off-cuts and unused materials are collected and stored for re-use or disposed following workplace procedures
  • 7.3 Waste and scrap materials are dealt with following workplace procedures
No information
No information
Replaces
State Code National Code Title Type
W8720 LMFPF1001B Frame a simple artwork Unit of competency
Replaced By
State Code National Code Title Type
OEJ85 MSFFP2013 Use basic artwork framing techniques Unit of competency