Unit of competency Outline

Date retreived
24/07/2026 6:17 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Select and use leather in automotive and marine trimming

Select and use leather in automotive and marine trimming

Unit of competency
National Code
AURVTT020
State Code
AWZ03
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030513 - Upholstery And Vehicle Trimming
Original Release Date
13/07/2016
Nominal Hours
70
Description
This unit describes the performance outcomes required to identify, select and use leather in the trimming of automotive and marine components. It involves preparing for the task, selecting and using specialist tools and equipment, checking leather quality, calculating required quantities, matching leather, fabricating and attaching covers and trim to manufacturer and customer instructions, and completing workplace processes and documentation. It applies to those working in the automotive and marine trimming industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to use leather trimming
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Adhesive safety data sheet (SDS) information is accessed and interpreted
  • 1.3 Materials are selected and inspected for quality, and quantities are calculated
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Trimming tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability
  • 1.6 Work and cutting are planned to minimise waste and use time efficiently
2. Fabricate leather components
  • 2.1 Leather features and characteristics are checked carefully prior to cutting and are matched against workplace instructions
  • 2.2 Leather pieces are laid and marked out in sequence according to developed cutting plan and safety and environmental requirements
  • 2.3 Leather pieces are cut according to cutting plan and using predetermined measurements or patterns
  • 2.4 Leather is sewn to produce required range of trimming components
3. Attach leather to vehicle, vessel or component
  • 3.1 Leather component is positioned and checked prior to being attached to ensure correct fit
  • 3.2 Leather is attached using most appropriate method and according to workplace procedures and job requirement
4. Complete work processes
  • 4.1 Final inspection is made to ensure work meets workplace expectations and component is presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF572 AURVTT3020 Select and use leather in trimming Unit of competency