Unit of competency Outline
Date retreived
23/07/2026 5:08 AM AWST
23/07/2026 5:08 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Install and maintain pole mounted switches and transformers
Install and maintain pole mounted switches and transformers
Unit of competency
National Code
TLIB4071A
TLIB4071A
State Code
D5009
D5009
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
30/10/2014
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
30/10/2014
Nominal Hours
20
Description
This unit involves the skills and knowledge required to install and maintain pole mounted switches and transformers in accordance with safeworking and regulatory requirements and workplace procedures, including planning the installation and maintenance, preparing the worksite, installing switches and transformers in accordance with workplace specifications, maintaining switches and transformers, and completing all work in accordance with workplace requirements. Licensing, legislative, regulatory or certification requirements are applicable to this unit.
Notes
Elements and Performance Criteria
1Plan installation and maintenance
- 1.1 Works order is analysed and confirmed, if necessary by site inspection
- 1.2 Resources required for the job are identified and scheduled according to organisation procedures
- 1.3 Switch equipment and transformer is transported to the worksite
- 1.4 Liaison and communication issues are resolved according to organisation negotiation procedures
2Prepare the worksite
- 2.1 Work plan and resources required are confirmed/checked at the work-site
- 2.2 Personnel participating in the activity, including plant operators and contractors, are fully briefed
- 2.3 Road signs, barriers and warning devices are positioned to ensure a safe worksite
- 2.4 Safeworking practices are observed on or about the running track/line
- 2.5 Work-site is laid out in accordance with the work plan so as to ensure a minimum of waste and rework
- 2.6 Systems/circuits are isolated as required, proved safe to work on in accordance with works order, and electrical permits are received/accepted/returned
3Install switches and transformers
- 3.1 Switch equipment , transformers and earthing systems are installed and connected
- 3.2 Transformer is tested and voltage output adjusted
- 3.3 Visual inspection is carried out to confirm that equipment/apparatus is in a safe condition to test and/or commission
- 3.4 Commission is carried out according to works order/plan
4Maintain switches and transformers
- 4.1 Maintenance requirement is confirmed by detailed diagnosis at site
- 4.2 Maintenance, including removal, repair, replacement and reinstatement, is carried out in accordance with the works order and the condition of equipment
5Complete the work
- 5.1 Worksite is rehabilitated
- 5.2 Appropriate authority is notified on completion of work
- 5.3 Records and documentation for updating system data are completed
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.
Operations may be conducted:
by day or night
in all relevant weather conditions
Work may be conducted in:
restricted spaces
exposed conditions
controlled or open environments
Work may involve exposure to:
chemicals
dangerous or hazardous substances
movements of equipment, materials and vehicles
Switchgear covered by the unit may include:
sectionalisers
dropout fuses
disconnectors
isolators
air break switches
links
fuses
fuse switches
circuit-breakers
Electrical apparatus may include:
transformers
surge diverters
earthing systems
Liaison may involve:
personnel
plant
equipment
transport
Communication equipment may include:
two-way radios
computers
telephones
Installation and maintenance work may be performed with:
the system energised, subject to the organisation's procedures including those for the use of live line working techniques and equipment
Maintenance may include:
the removal, repair and replacement of switching equipment and transformers including the repair, replacement and cleaning of associated hardware
Safety and protective equipment may include:
high visibility clothing
hearing protection
gloves
sunscreen
sunglasses
safety glasses
insect repellent
safety headwear
safety footwear
portable radios
hand lamps
flags
safety devices
Depending on the type of organisation concerned and the local terminology used, workplace procedures may include:
company procedures
enterprise procedures
organisational procedures
established procedures
Information/documents may include:
applicable legislated rail safety requirements including acts and regulations from each state and territory together with any nationally approved compliance codes and/or guidelines
operational instructions, policies and workplace procedures
works orders, including drawings, plans, materials and resource lists
equipment/operational management information
technical and engineering instructions
manufacturers or workplace equipment operation manuals and specifications
emergency procedure manuals
two-way radio operation procedures
QA plans, data and document control
conditions of service, legislation and industrial agreements including workplace agreements and awards
Applicable regulations and legislation may include:
applicable legislated rail safety requirements including acts and regulations from each state and territory together with any nationally approved compliance codes and/or guidelines
relevant Australian Standards and related requirements including AS 4292 and AS 3000
relevant state/territory OH&S legislation
relevant state/territory environmental protection legislation
ADG Code and associated requirements
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.
Operations may be conducted:
by day or night
in all relevant weather conditions
Work may be conducted in:
restricted spaces
exposed conditions
controlled or open environments
Work may involve exposure to:
chemicals
dangerous or hazardous substances
movements of equipment, materials and vehicles
Switchgear covered by the unit may include:
sectionalisers
dropout fuses
disconnectors
isolators
air break switches
links
fuses
fuse switches
circuit-breakers
Electrical apparatus may include:
transformers
surge diverters
earthing systems
Liaison may involve:
personnel
plant
equipment
transport
Communication equipment may include:
two-way radios
computers
telephones
Installation and maintenance work may be performed with:
the system energised, subject to the organisation's procedures including those for the use of live line working techniques and equipment
Maintenance may include:
the removal, repair and replacement of switching equipment and transformers including the repair, replacement and cleaning of associated hardware
Safety and protective equipment may include:
high visibility clothing
hearing protection
gloves
sunscreen
sunglasses
safety glasses
insect repellent
safety headwear
safety footwear
portable radios
hand lamps
flags
safety devices
Depending on the type of organisation concerned and the local terminology used, workplace procedures may include:
company procedures
enterprise procedures
organisational procedures
established procedures
Information/documents may include:
applicable legislated rail safety requirements including acts and regulations from each state and territory together with any nationally approved compliance codes and/or guidelines
operational instructions, policies and workplace procedures
works orders, including drawings, plans, materials and resource lists
equipment/operational management information
technical and engineering instructions
manufacturers or workplace equipment operation manuals and specifications
emergency procedure manuals
two-way radio operation procedures
QA plans, data and document control
conditions of service, legislation and industrial agreements including workplace agreements and awards
Applicable regulations and legislation may include:
applicable legislated rail safety requirements including acts and regulations from each state and territory together with any nationally approved compliance codes and/or guidelines
relevant Australian Standards and related requirements including AS 4292 and AS 3000
relevant state/territory OH&S legislation
relevant state/territory environmental protection legislation
ADG Code and associated requirements
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying:
the underpinning knowledge and skills
relevant legislation and workplace procedures
other relevant aspects of the range statement
Context of and specific resources for assessment
Performance is demonstrated consistently over a period of time and in a suitable range of contexts
Resources for assessment include:
a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or
access to an appropriate range of relevant operational situations in the workplace
In both real and simulated environments, access is required to:
relevant and appropriate materials and equipment, and
applicable documentation including workplace procedures, regulations, codes of practice and operation manuals
Method of assessment
Assessment of this unit must be undertaken by a registered training organisation
As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests
Practical assessment must occur:
through activities in an appropriately simulated environment at the registered training organisation, and/or
in an appropriate range of situations in the workplace
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying:
the underpinning knowledge and skills
relevant legislation and workplace procedures
other relevant aspects of the range statement
Context of and specific resources for assessment
Performance is demonstrated consistently over a period of time and in a suitable range of contexts
Resources for assessment include:
a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or
access to an appropriate range of relevant operational situations in the workplace
In both real and simulated environments, access is required to:
relevant and appropriate materials and equipment, and
applicable documentation including workplace procedures, regulations, codes of practice and operation manuals
Method of assessment
Assessment of this unit must be undertaken by a registered training organisation
As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests
Practical assessment must occur:
through activities in an appropriately simulated environment at the registered training organisation, and/or
in an appropriate range of situations in the workplace
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AVK28 | TLIB4071 | Install and maintain pole mounted switches and transformers | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| S790 | TLI32511 | Certificate III in Rail Infrastructure | Qualification |