Unit of competency Outline

Date retreived
22/07/2026 1:17 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform creel rack operations

Perform creel rack operations

Unit of competency
National Code
PMBPROD238
State Code
BAJ23
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
22/06/2016
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
05/08/2016
Nominal Hours
30
Description
This unit of competency covers the skills and knowledge required to perform creel rack operations as typically used in the production of steel-cored belts. The steel wire requirements will be set by belt specifications and may be complex, with numerous spools in operation at any one time. This unit of competency applies to operators who are required to prepare and set up for the work, load spools onto creel racks, check and adjust wire sequence, despatch empty spools and recognise routine and non-routine problems and take appropriate action. This unit of competency applies to an individual working alone or as part of a team or group and working in liaison with other shift team members, team leader and supervisor, as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Set up and load creel racks according to procedures
  • 1.1 Complete set-up checks
  • 1.2 Report non-conforming items
  • 1.3 Load spools onto creel rack.
  • 1.4 Complete required set-up
  • 1.5 Re-check wire sequence and set-up
  • 1.6 Ensure housekeeping is to requirements
  • 1.7 Identify hazards associated with the job and take appropriate action
2 Maintain continuous flow of cord during production
  • 2.1 Replace broken cord
  • 2.2 Reload creel racks with spools as required
  • 2.3 Crimp/join cord as required
3 Complete operations
  • 3.1 Despatch empty spools
  • 3.2 Clean and tidy the area and dispose of waste as required
4 Respond to routine problems to procedures
  • 4.1 Recognise known faults that occur during the operation
  • 4.2 Identify and take action on causes of routine faults
  • 4.3 Log problems as required
  • 4.4 Identify non-routine process and quality problems and take appropriate action
No information
No information
Replaces
State Code National Code Title Type
W7572 PMBPROD238A Perform creel rack operations Unit of competency
Replaced By
State Code National Code Title Type
ODB54 PMBPROD238E Perform creel rack operations for belting production Unit of competency