Unit of competency Outline

Date retreived
22/07/2026 5:34 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Undertake basic magnetic particle tests

Undertake basic magnetic particle tests

Unit of competency
National Code
MEM24041
State Code
OFH34
TGA Status
Current
DTWD Status
Pending
Current Release Number
1.00
Current Release Date
04/09/2025
View on TGA
State Implementation and Classification
Approved Date
Field of Education
030799 - Mechanical And Industrial Engineering And Technology, N.e.c.
Original Release Date
Nominal Hours
Description
This unit of competency defines the skills and knowledge required to undertake basic magnetic particle testing techniques in a range of industrial applications. Personnel are required to follow written or verbal test instructions and use specified test equipment/materials. They are not responsible for either the choice of test method/technique used or the interpretation of results.Basic magnetic particle tests are performed on critical components or structural zones. Personnel are required to consider actual and potential defects as well as ongoing abnormalities in fabrications, structures and/or critical components.This unit of competency applies to non-destructive testing (NDT) technicians who are performing basic magnetic particle tests as defined in Australian and international codes and standards in manufacturing, engineering and other associated industry sectors requiring NDT testing. The work is performed under the general supervision of NDT technicians recognised as competent in higher levels of magnetic particle testing, professional engineers and scientists; engineering technologists; and production, operations and maintenance managers.This unit should not be selected when unit MEM24024 Undertake magnetic particle tests has already been selected.Where reading and interpretation of technical drawings is required Unit MEM09229 Read and interpret technical drawings should also be selected.Where the selection and use of engineering measurement is required Unit MEM12023 Perform engineering measurements should also be selected.Where the selection and use of hand tools are required Unit MEM18001 Use hand tools should also be selected.Where the selection and use of power tools are required Unit MEM18002 Use power tools/hand held operations should also be selected.Assessment as competent against MEM24041 Undertake basic magnetic particle tests may contribute to certification against the Australian NDT standards where the assessment of this unit of competency is carried out in conjunction with an examining authority as described in AS ISO 9712 NDT - Qualification and certification of personnel, or subsequent Standards.
Notes
Elements and Performance Criteria
1. Determine job requirements
  • 1.1 Comply with relevant WHS and regulatory requirements, codes of practice, standards, and standard operating procedures (SOPs) for basic magnetic particle testing
  • 1.2 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.3 Identify job requirements from specifications
2. Prepare for testing
  • 2.1 Assemble all specified testing equipment, materials and containers and safety equipment
  • 2.2 Identify inspection area and determine if special access requirements are required
  • 2.3 Clean and prepare inspection areas for testing using appropriate test procedures and materials
  • 2.4 Assess inspection areas visually to identify obvious discontinuities
3. Conduct basic magnetic particle tests
  • 3.1 Identify nominated ‘yoke’ or ‘bench’ magnetic particle testing procedure from SOPs
  • 3.2 Prepare test equipment and materials in accordance with relevant standards and/or operating procedures
  • 3.3 Select the test media and apply the test in accordance with workplace practices and specifications
  • 3.4 Conduct the magnetic particle tests in accordance with relevant work instructions and WHS requirements
  • 3.5 De-magnetise material according to specifications
  • 3.6 Record any site observations that may affect results
4. Report results of basic magnetic particle tests
  • 4.1 Review conduct of the test and confirm test procedures were applied correctly
  • 4.2 Monitor indications and determine whether they are true or false
  • 4.3 Determine whether indications are relevant or non-relevant
  • 4.4 Determine type of discontinuity for each relevant indication
  • 4.5 Apply acceptance criteria to discontinuities to determine the presence of common defects
  • 4.6 Seek advice for problems outside technical competence or knowledge
  • 4.7 Report test results and complete all job records in accordance with relevant standards and/or procedures
5. Maintain a safe work environment
  • 5.1 Use established safe work practices and personal protective equipment to ensure personal safety and that of others
  • 5.2 Minimise environmental impacts of testing and generation of waste
  • 5.3 Restore test site, clean inspection area and equipment and dispose of all waste in accordance with enterprise procedures
  • 5.4 Store and maintain magnetic particle testing equipment in accordance with standard operating procedures and WHS requirements
No information
No information
No information