Unit of competency Outline

Date retreived
22/07/2026 12:49 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply decorative paint finishes

Apply decorative paint finishes

Unit of competency
National Code
CPCCPD3028
State Code
OCO74
TGA Status
Current
DTWD Status
Approved
Current Release Number
3.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040325 - Painting, Decorating And Sign Writing
Original Release Date
01/06/2021
Nominal Hours
50
Description
This unit of competency specifies the skills and knowledge required to apply decorative paint finishes to a range of different material surfaces. The unit includes:preparation of the application areaapplication of:mirror paint finishesbroken colour effectsmodern acrylic finisheslining by brushbasic stencilling basic special effectscompletion of clean-up activities.A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self direction.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industrymeets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare.
  • 1.1 Review work instructions to apply decorative paint finishes and select method of application.
  • 1.2 Plan all work to meet relevant requirements of work health and safety (WHS), Commonwealth and state or territory legislation, environmental plans and obligations, manufacturers’ specifications, and workplace requirements.
  • 1.3 Select and fit personal protective equipment (PPE) as required for each task.
  • 1.4 Inspect work site, assess hazards and apply risk controls, including required signage and barricades.
  • 1.5 Identify the types and quantities of materials required for the task and safely prepare and position ready for use.
  • 1.6 Select tools and equipment, check for serviceability and report any faults.
2 Prepare application area.
  • 2.1 Check that materials and substrate surfaces are prepared in accordance with manufacturer recommendations and relevant Australian Standards.
  • 2.2 Protect surrounding surfaces by drop sheets, masking or removal of objects.
  • 2.3 Check work site to ensure provision of adequate ventilation and implementation of precautions to prevent fire and explosion.
  • 2.4 Implement measures to ensure application area remains free of dust and foreign matter.
  • 2.5 Set-up area to apply decorative paint finishes.
3 Apply mirror paint finish.
  • 3.1 Apply prime and intermediate coats, allow to dry thoroughly and sand to a smooth, even finish.
  • 3.2 Adjust paint viscosity to suit climatic conditions and selected application method.
  • 3.3 Prepare surface for final coat of mirror paint finish.
  • 3.4 Apply final coat without imperfections, flowing out to an even, smooth finish and meeting all requirements.
4 Apply broken colour effects.
  • 4.1 Apply ground coat evenly to prepared surface to specified colour and consistency.
  • 4.2 Apply scumble glaze to prepared base coat and produce broken colour effect to match sample.
  • 4.3 Apply clear coating to achieve an even finish to specified sheen level.
5 Apply modern acrylic finishes.
  • 5.1 Prepare surface for application of acrylic finish.
  • 5.2 Apply acrylic finish to achieve an even finish to specification.
6 Apply lining by brush.
  • 6.1 Set out lining work to designed effect on prepared surface.
  • 6.2 Select paint materials, applicators and brushware for lining work.
  • 6.3 Apply application techniques to produce designed lining work effects and finish to requirements.
7 Apply basic stencilling.
  • 7.1 Use specified transfer method and cut design accurately using a register mark.
  • 7.2 Lay out stencil design on recommended material.
  • 7.3 Place and tape initial stencil to designed location.
  • 7.4 Apply paint to achieve designed effect.
8 Apply basic special finishes.
  • 8.1 Select special effect materials, applicators and brushware.
  • 8.2 Apply a range of traditional and modern special finishes to produce specified effects and finish.
9 Clean up.
  • 9.1 Clean up, meeting all legislative and workplace requirements for safety, waste disposal, materials handling and protection of the environment.
  • 9.2 Clear work area, reuse or recycle materials and place waste and unwanted materials into job waste bins or rubbish stockpile.
  • 9.3 Check and maintain tools and equipment and clean with appropriate solvents.
  • 9.4 Dispose of paint waste and water and solvents used in cleaning tools and equipment in an environmentally sustainable manner.
  • 9.5 Store tools, equipment and sealed unused materials to avoid spontaneous ignition.
No information
No information
Replaces
State Code National Code Title Type
D7392 CPCCPD3028A Apply decorative paint finishes Unit of competency