Unit of competency Outline

Date retreived
22/07/2026 8:13 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Plan and construct an electric fence

Plan and construct an electric fence

Unit of competency
National Code
AHCINF302
State Code
BAM13
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
27/06/2016
View on TGA
State Implementation and Classification
Approved Date
12/01/2017
Field of Education
040301 - Building Science And Technology
Original Release Date
12/01/2017
Nominal Hours
25
Description
This unit of competency describes the skills and knowledge required to plan, construct and maintain an electric fence.All work is carried out to comply with workplace procedures, work health and safety legislation and codes, manufacturer’s specifications and sustainability practices This unit applies to individuals who work under broad direction and take responsibility for their own work and use discretion and judgement in the selection and use of available resources.No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Determine electric fencing requirements
  • 1.1 Access property maps and assess fencing requirements according to enterprise objectives and legislative requirements
  • 1.2 Determine equipment, materials and labour requirements and ensure estimated costings are within budgetary constraints
  • 1.3 Compare alternative electric fencing options to ensure cost-effectiveness
  • 1.4 Prepare fencing plan giving consideration to siting fences in relation to natural features and proposed uses
2. Prepare for construction
  • 2.1 Seek clarification of work plan
  • 2.2 Organise and transport tools and equipment to the work site
  • 2.3 Confirm and arrange labour requirements if required
  • 2.4 Assess risk and minimise potential and existing hazards appropriately
3. Construct electric fence
  • 3.1 Select, use and maintain suitable personal protective equipment
  • 3.2 Construct electric fence according to work plan
  • 3.3 Attach and position gates for correct operation and function
  • 3.4 Install energiser according to manufacturer's specifications.
4. Complete fencing operations
  • 4.1 Check fencing for correct installation and performance
  • 4.2 Identify and fix electric fence faults
  • 4.3 Clear and tidy work site and dispose of all waste in an environmentally responsible manner
  • 4.4 Transport tools and fencing equipment from the work site and check and store
  • 4.5 Record and maintain relevant information
No information
No information
Replaces
State Code National Code Title Type
D6817 AHCINF302A Plan and construct an electric fence Unit of competency
Replaced By
State Code National Code Title Type
OFB15 AHCINF306 Plan and construct an electric fence Unit of competency