Unit of competency Outline

Date retreived
23/07/2026 5:39 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Service and repair bicycle mechanical braking systems

Service and repair bicycle mechanical braking systems

Unit of competency
National Code
AURBTB101
State Code
OCI86
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
13/11/2020
View on TGA
State Implementation and Classification
Approved Date
31/03/2021
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
31/03/2021
Nominal Hours
20
Description
This unit describes the skills and knowledge required to service and repair bicycle mechanical braking systems. The unit involves preparing for the work, selecting and using specialist tools and equipment, planning, inspecting, servicing and repairing, and testing the bicycle braking system, and completing workplace processes and documentation. The unit applies to those working in the bicycle retail, service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to service and repair bicycle mechanical braking system
  • 1.1 Determine job requirements from workplace instructions
  • 1.2 Access and interpret manufacturer specifications, workplace procedures and other relevant technical information
  • 1.3 Identify hazards associated with the work and manage risks
  • 1.4 Select and check tools and equipment, including personal protective equipment (PPE), for serviceability
  • 1.5 Plan work to avoid damage to bicycle, minimise waste and use time efficiently
2. Inspect and diagnose braking system
  • 2.1 Inspect mechanical braking system for faults and worn or damaged components using visual inspection methods and comparison of measurements against manufacturer specifications
  • 2.2 Determine condition of bicycle braking system in line with system specifications and customer requirements
  • 2.3 Identify service and repair options
  • 2.4 Document and cost service and repair items for customer approval according to workplace procedures
3. Carry out service and repair of braking system
  • 3.1 Use tools and equipment according to workplace procedures and manufacturer specifications
  • 3.2 Carry out service and repair of mechanical braking system according to work plan and safety and environmental requirements
  • 3.3 Check and fit required replacement parts according to manufacturer specifications
  • 3.4 Check and test braking system specifications for required operation in a safe location
  • 3.5 Make adjustments to braking system as required according to workplace procedures
4. Complete work processes
  • 4.1 Conduct final inspection according to workplace procedures and confirm bicycle is ready for use
  • 4.2 Clear work area and dispose of or recycle materials according to workplace procedures
  • 4.3 Complete documentation according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
AXE49 AURBTB001 Service and repair bicycle mechanical braking systems Unit of competency