Unit of competency Outline

Date retreived
22/07/2026 11:43 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Service and repair bicycle mechanical braking systems

Service and repair bicycle mechanical braking systems

Unit of competency
National Code
AURBTB001
State Code
AXE49
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to service and repair bicycle mechanical braking systems. It involves preparing for the work, selecting and using specialist tools and equipment, planning, inspecting, servicing and repairing, and testing the bicycle braking system, and completing workplace processes and documentation. It applies to those working in the bicycle retail, service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to service and repair bicycle mechanical braking system
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Manufacturer specifications, workplace procedures and other relevant technical information are accessed and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  • 1.5 Work is planned to avoid damage to bicycle, minimise waste and use time efficiently
2. Inspect and diagnose braking system
  • 2.1 Mechanical braking system is inspected for faults and worn or damaged components using visual inspection methods and by comparing measurements against manufacturer specifications
  • 2.2 Condition of bicycle braking system is determined in line with system specifications and customer requirements
  • 2.3 Service and repair options are identified
  • 2.4 Service and repair items are documented and costed for customer approval according to workplace procedures
3. Carry out service and repair of braking system
  • 3.1 Tools and equipment are used according to workplace procedures and manufacturer specifications
  • 3.2 Service and repair of mechanical braking system are carried out according to work plan and safety and environmental requirements
  • 3.3 Required replacement parts are checked and fitted according to manufacturer specifications
  • 3.4 Braking system specifications are checked and tested for correct operation in a safe location
  • 3.5 Adjustments are made to braking system as required according to workplace procedures
4. Complete work processes
  • 4.1 Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF048 AURBTB2001 Service and repair bicycle mechanical braking systems Unit of competency
Replaced By
State Code National Code Title Type
OCI86 AURBTB101 Service and repair bicycle mechanical braking systems Unit of competency