Unit of competency Outline

Date retreived
23/07/2026 7:01 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Prepare and apply decorative surfaces for furnishing products

Prepare and apply decorative surfaces for furnishing products

Unit of competency
National Code
MSFFM3028
State Code
OEK63
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
08/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030113 - Cabinet Making
Original Release Date
19/04/2023
Nominal Hours
20
Description
This unit describes the skills and knowledge required to prepare, construct and apply veneers and inlays to furnishing product.Workers with this competency follow established procedures using some discretion, judgement and problem solving.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1 Prepare for task
  • 1.1 Determine task requirements from design and other work documentation
  • 1.2 Plan construction sequence and identify procedures for checking quality at each stage
  • 1.3 Identify and follow work health and safety procedures
  • 1.4 Select suitable work area for task
  • 1.5 Select tools and equipment to meet task requirements and check that they are safe and functional
  • 1.6 Check that materials meet task quality requirements.
2 Lay out and prepare materials
  • 2.1 Confirm quality of materials against job requirements and lay out to required design
  • 2.2 Select suitable joining points based on job requirements
  • 2.3 Prepare and cut material to required size and thickness
3 Construct and apply decorative surfaces
  • 3.1 Use machinery safely and in accordance with workplace procedures
  • 3.2 Cut and join items to specifications and in accordance with workplace procedures
  • 3.3 Use adhesives in accordance with workplace procedures and manufacturer instructions
  • 3.4 Check product quality against specifications at each stage of construction and assembly and rectify any non-conformity
4 Finalise task
  • 4.1 Clean work area, safely dispose of waste and identify items for recycling in accordance with workplace procedures and environmental standards
  • 4.2 Clean machinery, complete routine maintenance and leave in safe mode in accordance with workplace procedures
  • 4.3 Identify, tag and report faulty equipment in accordance with workplace procedures
  • 4.4 Complete task documentation in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WI428 MSFFM3007 Prepare and apply decorative surfaces for furniture Unit of competency
State Code National Code Title Type
BIK0 MSF30322 Certificate III in Cabinet Making and Timber Technology Qualification