Unit of competency Outline

Date retreived
22/07/2026 3:15 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up and operate in-line cutter

Set up and operate in-line cutter

Unit of competency
National Code
ICPCBF222
State Code
AUO17
TGA Status
Deleted
DTWD Status
Transition (Deleted)
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030717 - Plant And Machine Operations
Original Release Date
16/09/2015
Nominal Hours
20
Description
This unit describes the skills and knowledge required to safely set up and operate an in-line cutter set for high run jobs, including determining the quality of output and correctly packing completed product.It applies to individuals working under direct supervision, performing tasks related to operating machinery and completing production requirements according to job specifications and internal procedures. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for job
  • 1.1 Job specifications are read and interpreted from job documentation or process control system
  • 1.2 Job is signed off from previous process and ready for mailing procedures
  • 1.3 Materials are checked and in correct order for the job
  • 1.4 Work area is safe and ready for production according to safety requirements
2. Set up job
  • 2.1 Job specifications are entered into console according to enterprise requirements
  • 2.2 Guides and guards and cut depth are correctly set and positioned according to job specifications
  • 2.3 Settings are checked against job specifications before production is commenced
  • 2.4 Settings are tested with a product sample, and adjustments are made if necessary
3. Operate in-line cutter
  • 3.1 Product is loaded in correct position according to job specifications
  • 3.2 Quality check is carried out and defective product is removed according to enterprise procedures
  • 3.3 Adjustments are made when quality standards are not met
  • 3.4 Wastage is monitored, kept to a minimum and correctly disposed of according to enterprise quality standards
4. Pack cut product
  • 4.1 Completed product is unloaded and checked for quality
  • 4.2 Completed product is packed into labelled trays ensuring job/order continuity for transfer to the next process
  • 4.3 Documentation relating to the product is completed correctly
  • 4.4 Machine is cleared and stock put away
No information
No information
Replaces
State Code National Code Title Type
D3018 ICPCF222C Set up and operate in-line cutter Unit of competency
State Code National Code Title Type
AWB3 ICP20115 Certificate II in Printing and Graphic Arts (General) Qualification