Unit of competency Outline

Date retreived
22/07/2026 7:22 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up and operate in-line cutter

Set up and operate in-line cutter

Unit of competency
National Code
ICPCF222C
State Code
D3018
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
05/07/2010
View on TGA
State Implementation and Classification
Approved Date
09/09/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
09/09/2014
Nominal Hours
20
Description
This unit describes the performance outcomes, skills and knowledge required to safely set up and operate an in-line cutter set for high run jobs.
Notes
Elements and Performance Criteria
1. Prepare for job
  • 1.1. Job specifications are read and interpreted from job documentation or process control system
  • 1.2. Job is signed off from previous process and ready for mailing procedures
  • 1.3. The materials are checked and in correct order for the job
  • 1.4. Work area is safe and ready for production according to safety requirements
2. Set up job
  • 2.1. Job specifications are entered into console according to job specifications
  • 2.2. Guides and guards and cut depth are correctly set and positioned according to job specifications
  • 2.3. Settings are checked against job specifications before production is commenced
  • 2.4. Settings are tested with a product sample and adjustments are made if necessary
3. Operate in-line cutter
  • 3.1. Product is loaded in correct position according to job specifications
  • 3.2. Quality check is carried out and defective product is removed according to enterprise procedures
  • 3.3. Adjustments are made when the quality standards are not met
  • 3.4. Wastage is monitored, kept to a minimum and correctly disposed of according to enterprise quality standards
4. Pack cut product
  • 4.1. Completed product is unloaded and checked for quality
  • 4.2. Completed product is packed into labelled trays ensuring job/order continuity for transfer to the next process
  • 4.3. Documentation relating to the product is completed correctly
  • 4.4. The machine is cleared and stock put away
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Product/materials may include:
books
CD-ROMs
DVDs
sheet stock
laminates
film.
Machinery may include:
an in-line cutter set for high run jobs.
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit
Evidence of the following is essential:
safely operate an in-line cutter. The in-line cutter is set up to meet the job specifications with minimum downtime. The individual will monitor for quality during the process and at the end when packing the product
the individual will finish TWO complete jobs on an in-line cutter including packing the product for the next stage in the process
evidence for assessment may be gathered from assessment of the unit of competency alone or through an integrated assessment activity.

Context of and specific resources for assessment
Assessment must ensure:
assessment may take place on the job, off the job or a combination of these
off the job assessment must be undertaken in a closely simulated workplace environment
access to an in-line cutter.

Method of assessment
A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:
direct questioning combined with review of portfolios of evidence and third party workplace reports of on-the-job performance by the candidate.

Guidance information for assessment
Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended
Replaces
State Code National Code Title Type
D0281 ICPCF222B Set up and operate in-line cutter Unit of competency
Replaced By
State Code National Code Title Type
AUO17 ICPCBF222 Set up and operate in-line cutter Unit of competency