Unit of competency Outline

Date retreived
24/07/2026 1:43 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up machine for basic laminating

Set up machine for basic laminating

Unit of competency
National Code
ICPCBF2810
State Code
OBP43
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
06/05/2020
View on TGA
State Implementation and Classification
Approved Date
20/08/2020
Field of Education
030103 - Printing
Original Release Date
20/08/2020
Nominal Hours
30
Description
This unit describes the skills and knowledge required to set up a machine for a range of laminating processes, including laminating reel to reel, sheet to reel and reel to sheet.It applies to individuals who work under direct supervision, who are responsible for operating and monitoring equipment and machinery.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for job
  • 1.1 Identify job specifications
  • 1.2 Carry out set-up of required machinery according to manufacturer specifications
  • 1.3 Confirm availability of all job related components
  • 1.4 Set up and adjust delivery systems
2. Set up laminating machine
  • 2.1 Set up and adjust application system cylinder
  • 2.2 Set up and adjust adhesive application system
  • 2.3 Set up and adjust binding pressures
  • 2.4 Set up and adjust drying system
3. Set up in-line units
  • 3.1 Set up and adjust minor in-line units for basic processes according to machine requirements
  • 3.2 Provide assistance in set-up of major in-line units
4. Conduct sample run
  • 4.1 Set up and operate machine to produce a specified sample according to work health and safety (WHS) requirements, manufacturer specifications and enterprise procedures
  • 4.2 Inspect, and test sample as required according to enterprise procedures
  • 4.3 Interpret results and determine adjustment requirements
  • 4.4 Carry out adjustment changes according to product and machine specifications
No information
No information
Replaces
State Code National Code Title Type
AUO83 ICPCBF281 Set up machine for basic laminating Unit of competency