Unit of competency Outline

Date retreived
22/07/2026 1:57 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Tail out materials

Tail out materials

Unit of competency
National Code
FWPCOT2205
State Code
AXL96
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
05/10/2016
Nominal Hours
15
Description
This unit of competency specifies the outcomes required to clear sawn or machined materials and waste from a saw or machine while maintaining process flow and checking and sorting the finished product.The unit applies to Timber Puller.No licensing or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for cutting or machining process
  • 1.1 Review work order and identify required finished board sizes and quantities in line with operator.
  • 1.2 Prepare to work safely according to workplace work health and safety (WHS) requirements.
  • 1.3 Check sequence of cuts or machining passes with operator and work order, where multiple cuts are required.
2. Maintain process flow.
  • 2.1 Control flitch, cant or board to maintain process flow in line with sawing or dressing speed, WHS requirements and production standards.
  • 2.2 Control and regularly clear sawn waste and material in line with site procedures and environmental requirements.
  • 2.3 Assess flitch, cant or board for further processing requirements and return to operator in line with production standards.
  • 2.4 Identify and report problems in flow or processing of materials to operator for resolution.
  • 2.5 Dispose of faulty or defective material in line with site procedures and environmental requirements, as directed by operator.
3. Sort finished product and follow record-keeping procedures.
  • 3.1 Sort and stack boards in line with site procedures and specific operational requirements.
  • 3.2 Assess boards for standard sizes in line with site procedures.
  • 3.3 Segregate and store or direct recoverable material and waste for further processing in line with site procedures.
  • 3.4 Record and report production and quality information in line with site procedures and organisational requirements.
No information
No information
Replaces
State Code National Code Title Type
D5884 FPICOT2205B Tail out materials Unit of competency
Replaced By
State Code National Code Title Type
OBM67 FWPCOT2243 Tail out timber product and waste material Unit of competency