Unit of competency Outline
Date retreived
22/07/2026 10:38 PM AWST
22/07/2026 10:38 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Specify, install and operate audio for an outdoor event
Specify, install and operate audio for an outdoor event
Unit of competency
National Code
CUESOU13B
CUESOU13B
State Code
D1601
D1601
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
01/04/2010
Field of Education
100701 - Audio Visual Studies
Original Release Date
01/04/2010
Nominal Hours
60
Description
This unit describes the skills and knowledge required to specify, set-up and operate an audio system for an outdoor event. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of endorsement.
Notes
Elements and Performance Criteria
1. Specify audio for an outdoor event
- 1.1. Correctly interpret performance/production outline to determine audio requirements
- 1.2. Source and analyse relevant information on regulations that affect the design of outdoor audio systems, including noise pollution and insurance issues
- 1.3. Research the venue or site to determine specific factors for consideration in outdoor audio system specification
- 1.4. Accurately record site information in an appropriate format to assist with system design
- 1.5. Develop appropriate audio system specification with full consideration of power issues, loudspeaker requirements and sound pressure factors
- 1.6. Develop an accurate schedule of system requirements, including all components, with specific reference to additional infrastructure and equipment requirements for outdoor audio
2. Install audio system for an outdoor event
- 2.1. Complete checks to ensure availability of all resources prior to installation phase
- 2.2. Install audio system in accordance with safety procedures and test for adherence to site restrictions, emergency procedures and noise pollution limitations within scope of individual responsibility and certification
- 2.3. Liaise with relevant colleagues during installation to ensure efficiency of installation and maximum cooperation
- 2.4. Make appropriate checks to ensure mains power is well reserved
3. Operate and monitor outdoor audio
- 3.1. Monitor sound dispersion, weather and overall sound quality and take appropriate action to rectify any problems within scope of individual responsibility and certification
- 3.2. Monitor reporting system for sound pressure levels at various positions on and off site
- 3.3. Monitor ambient temperature and re-evaluate time delay settings accordingly
- 3.4. Communicate with colleagues during operation to share relevant information and ensure quality of production
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Factors for consideration in outdoor audio system design may include:
legal issues associated with sound re-enforcement/noise pollution
location of audience
need for specialist assistance
performer requirements
positioning of stage
presence of trees or other site features which may affect audio operation
relationship of equipment location to audience
site dimensions
time of year/forecasted weather patterns
Additional infrastructure and equipment requirements for outdoor audio may include:
crowd barriers around equipment
flying towers
occupational health and safety requirements
platforms
protection for equipment
rigging
support and mixing positions
Relevant colleagues with whom liaison may be required during set-up may include:
event manager
performers
production manager
specialists, eg acousticians
stage manager
other technicians (both audio and others)
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Factors for consideration in outdoor audio system design may include:
legal issues associated with sound re-enforcement/noise pollution
location of audience
need for specialist assistance
performer requirements
positioning of stage
presence of trees or other site features which may affect audio operation
relationship of equipment location to audience
site dimensions
time of year/forecasted weather patterns
Additional infrastructure and equipment requirements for outdoor audio may include:
crowd barriers around equipment
flying towers
occupational health and safety requirements
platforms
protection for equipment
rigging
support and mixing positions
Relevant colleagues with whom liaison may be required during set-up may include:
event manager
performers
production manager
specialists, eg acousticians
stage manager
other technicians (both audio and others)
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The following evidence is critical to the judgement of competence in this unit:
knowledge of the particular issues that affect the design, installation and operation of outdoor audio
ability to design, install and operate a system that meets production requirements and takes account of all relevant environmental factors.
Context of and specific resources for assessment
The assessment context must provide for:
practical demonstration of skills using industry-current equipment through the design, installation and operation of an audio system for more than one outdoor event
involvement of and interaction with a production and performance team to reflect the collaborative nature of the unit
use of industry-current equipment.
Method of assessment
Assessment may incorporate a range of methods to assess performance and the application of essential underpinning knowledge, and might include:
evaluation of the audio quality at an outdoor event for which the candidate has designed and operated the audio system
projects or case studies to assess ability to design outdoor audio systems for different environmental conditions
oral or written questioning to assess knowledge of the particular issues impact on outdoor sound
review of portfolios of evidence and third party workplace reports of on-the-job performance by the candidate.
Assessment methods should closely reflect workplace demands and the needs of particular groups (e.g. people with disabilities, and people who may have literacy or numeracy difficulties such as speakers of languages other than English, remote communities and those with interrupted schooling).
Guidance information for assessment
Assessment of this unit requires access to:
an outdoor venue
industry-current audio and other relevant staging equipment suitable for outdoor use.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The following evidence is critical to the judgement of competence in this unit:
knowledge of the particular issues that affect the design, installation and operation of outdoor audio
ability to design, install and operate a system that meets production requirements and takes account of all relevant environmental factors.
Context of and specific resources for assessment
The assessment context must provide for:
practical demonstration of skills using industry-current equipment through the design, installation and operation of an audio system for more than one outdoor event
involvement of and interaction with a production and performance team to reflect the collaborative nature of the unit
use of industry-current equipment.
Method of assessment
Assessment may incorporate a range of methods to assess performance and the application of essential underpinning knowledge, and might include:
evaluation of the audio quality at an outdoor event for which the candidate has designed and operated the audio system
projects or case studies to assess ability to design outdoor audio systems for different environmental conditions
oral or written questioning to assess knowledge of the particular issues impact on outdoor sound
review of portfolios of evidence and third party workplace reports of on-the-job performance by the candidate.
Assessment methods should closely reflect workplace demands and the needs of particular groups (e.g. people with disabilities, and people who may have literacy or numeracy difficulties such as speakers of languages other than English, remote communities and those with interrupted schooling).
Guidance information for assessment
Assessment of this unit requires access to:
an outdoor venue
industry-current audio and other relevant staging equipment suitable for outdoor use.
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WI212 | CUASOU501 | Manage audio operations for outdoor events | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| D361 | CUS50209 | Diploma of Sound Production | Qualification |