Unit of competency Outline

Date retreived
22/07/2026 8:12 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Inspect, service and repair auxiliary braking systems

Inspect, service and repair auxiliary braking systems

Unit of competency
National Code
AURTTB006
State Code
AXA85
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to inspect, service and repair auxiliary braking systems. It involves preparing for the task, inspecting the system, servicing and carrying out any necessary repairs to the system, performing post-service or repair testing, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry. The auxiliary braking systems include those of agricultural machinery, heavy commercial vehicles or mobile plant machinery. The unit applies to vehicles or machinery fitted with speed reducing or control devices, such as engine brakes, exhaust brakes or hydraulic or electrical retarders.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to inspect, service and repair auxiliary braking system
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Inspection, service and repair procedures and information are sourced and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools and equipment are selected and checked for serviceability
2. Conduct inspection and analyse results
  • 2.1 Inspection is carried out according to manufacturer specifications, workplace procedures and safety requirements
  • 2.2 Faults are identified from inspection results and causes of faults are determined as required
  • 2.3 Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments
3. Service and repair system
  • 3.1 Service and repair procedures and information are sourced and interpreted
  • 3.2 Service and repair tools, equipment and materials are selected and checked according to workplace procedures
  • 3.3 Service, repairs and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  • 3.4 Post-service and repair testing is carried out according to workplace procedures
4. Complete work processes
  • 4.1 Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 4.3 Tools and equipment are checked and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF399 AURTTB3006 Inspect, service and repair auxiliary braking systems Unit of competency