Unit of competency Outline

Date retreived
22/07/2026 8:36 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Inspect and pack reusable medical devices

Inspect and pack reusable medical devices

Unit of competency
National Code
HLTSTE002
State Code
AUZ72
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
06/08/2015
View on TGA
State Implementation and Classification
Approved Date
22/01/2016
Field of Education
019909 - Laboratory Technology
Original Release Date
22/01/2016
Nominal Hours
30
Description
This unit describes the skills and knowledge required to prepare, assemble and package cleaned reusable medical devices according to manufacturer’s instructions.This unit applies to individuals working under general supervision and within established procedures in a range of health service organisations.The skills in this unit must be applied in accordance with Commonwealth and State/Territory legislation, Australian/New Zealand standards and industry codes of practice.
Notes
Elements and Performance Criteria
1. Prepare for inspection and packing
  • 1.1 Select and wear appropriate attire and ensure personal hygiene preparations are followed
  • 1.2 Clean area prior to processing according to infection control guidelines
  • 1.3 Test packing equipment in readiness for use and accurately document results
2. Inspect reusable medical devices
  • 2.1 Sort items according to priority, specialties and packaging requirements and product families
  • 2.2 Inspect items for cleanliness and dryness and reprocess where required
  • 2.3 Inspect items for functionality and completeness according to organisation requirements
  • 2.4 Follow safe procedures for insulation testing as required
  • 2.5 Use illuminated magnifier appropriately
  • 2.6 Identify loan items and implantable items
  • 2.7 Identify, report, remove and/or replace damaged/faulty items and items due for preventative maintenance
  • 2.8 Report missing items according to organisation policies and protocols
3. Prepare and assemble reusable medical devices
  • 3.1 Select, inspect and prepare instrument trays or rigid sterilisation containers against checklists
  • 3.2 Open and unlock items with hinges/ratchets
  • 3.3 Disassemble/loosen multi-part instruments and re-assemble to ensure sterilant contact on all surfaces according to manufacturer’s instructions
  • 3.4 Lubricate according to manufacturer instructions
  • 3.5 Prepare hollow ware items with all openings facing the same direction
  • 3.6 Protect delicate and sharp items in accordance with organisation policies and procedures
  • 3.7 Use chemical indicators according to standards
4. Package reusable medical devices
  • 4.1 Select packaging systems with reference to sterilisation method
  • 4.2 Use safe manual handling techniques
  • 4.3 Interpret operating instructions for packaging equipment and use equipment safely
  • 4.4 Pack, secure and label sterile barrier systems to comply with aseptic removal principles
  • 4.5 Assemble and package thermally disinfected reusable medical devices for transfer to appropriate location
  • 4.6 Complete accurate quality assurance documentation
No information
No information
Replaces
State Code National Code Title Type
WD291 HLTSTE302D Inspect and pack items Unit of competency
State Code National Code Title Type
AWN1 HLT47015 Certificate IV in Sterilisation Services Qualification
AWK3 HLT37015 Certificate III in Sterilisation Services Qualification