Unit of competency Outline

Date retreived
22/07/2026 9:53 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Rectify faults in product

Rectify faults in product

Unit of competency
National Code
MSFSS2004
State Code
OEL03
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
08/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
040319 - Furnishing Installation
Original Release Date
19/04/2023
Nominal Hours
30
Description
This unit describes the skills and knowledge required to identify and rectify defects in workmanship or materials that affect the look or functional quality of security screen or grille products. Work may be performed during installation or production of security screens or grilles, or independently. Workers with this competency follow established procedures to produce or install security screens and grilles.Licensing, legislative or certification requirements may apply to this unit and relevant state or territory and local government agencies should be consulted to determine any necessary certification or licensing for undertaking security screens and grilles work. Access to construction sites requires certification of general induction training specified by the National Code of Practice for Induction for Construction Work (ASCC 2007).
Notes
Elements and Performance Criteria
1. Plan and prepare for task
  • 1.1 Determine task requirements from work documentation
  • 1.2 Identify and follow work health and safety requirements
  • 1.3 Select tools and equipment to meet task requirements of job, check for serviceability, and rectify or report any faults in accordance with workplace procedures
  • 1.4 Identify, obtain and prepare materials to complete task in accordance with job and safe handling requirements
  • 1.5 Prepare work area and minimise noise, dust and obstacles in accordance with workplace procedures and environmental standards
2. Assess fault to identify rectification issues
  • 2.1 Identify and inspect faults to confirm extent and nature of fault
  • 2.2 Determine and report on nature and causes of faults
  • 2.3 Assess faults to inform required remediation approach
  • 2.4 Confirm solution to repair the fault and plan approach
3. Rectify faults
  • 3.1 Prepare damaged or defective area for repair in accordance with workplace procedures
  • 3.2 Apply required specialist instruments and tools to rectify fault
  • 3.3 Complete rectification to damaged or defective area to meet task requirements
  • 3.4 Process rectified parts for inspection and return to production or installation sequence
4. Clean up work area
  • 4.1 Check, clean and store equipment and unused materials in accordance with workplace procedures
  • 4.2 Tag unserviceable equipment, identify faults and inform appropriate personnel in accordance with workplace procedures
  • 4.3 Clean work area, safely dispose of waste and identify items for recycling in accordance with workplace procedures and environmental standards
  • 4.4 Complete required workplace records, including nature of fault, work conducted and outcome
No information
No information
Replaces
State Code National Code Title Type
WI654 MSFSS2001 Rectify faults in product Unit of competency
State Code National Code Title Type
BIJ6 MSF20122 Certificate II in Furnishing Qualification