Unit of competency Outline

Date retreived
22/07/2026 11:58 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Rectify faults in product

Rectify faults in product

Unit of competency
National Code
MSFSS2001
State Code
WI654
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
040319 - Furnishing Installation
Original Release Date
19/06/2014
Nominal Hours
30
Description
This unit of competency covers identifying and rectifying faults in security screen and grille materials and products.Licensing, legislative or certification requirements may apply to this unit and relevant state/territory and local government agencies should be consulted to determine any necessary certification or licensing for undertaking security screens and grilles work. Access to construction sites requires certification of general induction training specified by the National Code of Practice for Induction for Construction Work (ASCC 2007).
Notes
Elements and Performance Criteria
1 Plan and prepare
  • 1.1 Applicable work health and safety (WHS), legislative and organisational requirements relevant to rectifying faults in the manufacturing and installation of security screens and grilles are verified and complied with
  • 1.2 Tools and equipment are selected to carry out tasks, are consistent with the requirements of the job, checked for serviceability, and any faults are rectified or reported prior to commencement
  • 1.3 Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use
  • 1.4 Workplace environment considerations are identified and measures to reduce noise, dust and obstacles are applied
2 Assess the fault to identify rectification issues
  • 2.1 Faults are identified and inspected to confirm the extent and nature of the fault
  • 2.2 Faults are assessed to determine whether it is a defect in workmanship, process or material
  • 2.3 Verbal and/or written report on the nature of the defect and probable cause is provided
  • 2.4 Faults found are assessed for remedial solutions
  • 2.5 Solution to repair the fault is selected and planned
3 Rectify faults
  • 3.1 Damage or defective area is prepared for repair
  • 3.2 Specialist instruments and repair tools are applied to rectify the fault
  • 3.3 Damage or defective area is finished to specification
  • 3.4 Documentation is completed outlining the nature of the fault, work conducted and outcome, in accordance with enterprise requirements
  • 3.5 Rectified parts are processed for inspection and returned to the production/installation sequence
4 Clean up work area
  • 4.1 Work area is cleared and materials disposed of
  • 4.2 Tools and equipment are cleaned
No information
No information
Replaces
State Code National Code Title Type
W8798 LMFSS2002A Rectify faults in product Unit of competency
Replaced By
State Code National Code Title Type
OEL03 MSFSS2004 Rectify faults in product Unit of competency
State Code National Code Title Type
J725 MSF20113 Certificate II in Furnishing Qualification