Unit of competency Outline

Date retreived
22/07/2026 10:55 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Transplant shrubs and small trees

Transplant shrubs and small trees

Unit of competency
National Code
AHCPGD210
State Code
ODU70
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
15/02/2022
View on TGA
State Implementation and Classification
Approved Date
31/05/2022
Field of Education
050301 - Horticulture
Original Release Date
31/05/2022
Nominal Hours
20
Description
This unit of competency describes the skills and knowledge required to transplant shrubs and small trees without the use of lifting machinery or equipment, including preparing for shrub or small tree removal, removing and replanting shrub or small tree, and completing work.The unit applies to individuals who transplant shrubs and small trees under general supervision with limited autonomy or accountability.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for tree or shrub removal
  • 1.1 Confirm transplanting instructions and activities with supervisor
  • 1.2 Identify workplace health and safety hazards, assess risks and report to supervisor
  • 1.3 Confirm with supervisor location of underground and above ground services
  • 1.4 Prepare and use tools and equipment appropriate to the task
  • 1.5 Select, fit and use personal protective equipment (PPE) applicable to the task
2. Prepare tree or shrub and undertake earthworks for removal
  • 2.1 Prepare crown as required by species and time of removal
  • 2.2 Clear and water site prior to transplanting
  • 2.3 Confirm root ball width and depth with supervisor to ensure root system can colonise new ground
3. Remove tree or shrub from original site
  • 3.1 Excavate soil around the root zone
  • 3.2 Prune tree roots where required
  • 3.3 Stabilise tree as root system is undercut and apply anti-transpirants as a root soak or foliar spray to ensure viability of plant is maintained
  • 3.4 Bind root ball with appropriate material to ensure adequate soil is retained and kept moist prior to transportation and installation
  • 3.5 Lift tree and secure for potential storage or transportation using safe manual lifting techniques
  • 3.6 Prepare and handle tree or shrub to minimise damage during handling and transportation
4. Replant tree or shrub in new environment
  • 4.1 Provide appropriate drainage to ensure root system survival is maintained according to the needs of the species and conditions of planting site
  • 4.2 Modify soil according to the cultural requirements of species
  • 4.3 Plant tree or shrub in prepared hole
  • 4.4 Install plant support devices as directed
  • 4.5 Apply mulch as directed
5. Complete work
  • 5.1 Maintain transplanted plant with regular aftercare activities appropriate to requirements of the species
  • 5.2 Remove and dispose of or recycle rubbish and plant waste material
  • 5.3 Clean, maintain and store tools and equipment
  • 5.4 Report work outcomes and malfunctions, faults, wear or damage of tools to supervisor
No information
No information
Replaces
State Code National Code Title Type
BAS48 AHCPGD204 Transplant small trees Unit of competency