Unit of competency Outline

Date retreived
23/07/2026 4:45 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Transplant small trees

Transplant small trees

Unit of competency
National Code
AHCPGD204
State Code
BAS48
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
27/06/2016
View on TGA
State Implementation and Classification
Approved Date
12/01/2017
Field of Education
050301 - Horticulture
Original Release Date
12/01/2017
Nominal Hours
30
Description
This unit of competency describes the skills and knowledge required to transplant small trees and shrubs without the use of lifting machinery or equipment.It applies to individuals who work under general supervision and exercise limited autonomy with some accountability for their own work. They undertake defined activities and work in a structured context.No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for tree or shrub removal
  • 1.1 Confirm transplanting instructions confirmed with the supervisor
  • 1.2 Identify work health and safety hazards and report to the supervisor
  • 1.3 Locate all underground services as outlined by supply authorities
  • 1.4 Prepare and use tools and equipment appropriate to the task being undertaken
  • 1.5 Select and use suitable personal protective equipment (PPE)
2. Prepare tree or shrub and undertake earthworks for removal
  • 2.1 Prepare crown as required by the species and time of removal
  • 2.2 Clear and water site prior to transplanting
  • 2.3 Confirm root ball width and depth with the supervisor to ensure the root system can colonise new ground, depending on the needs of the species and size of the specimen
3. Remove tree or shrub from original site
  • 3.1 Excavate the soil around the root zone
  • 3.2 Prune tree roots where required to meet the appropriate Australian Standard
  • 3.3 Stabilise tree as the root system is undercut and apply anti-transpirants as a root soak or foliar spray to ensure viability of the plant is maintained
  • 3.4 Bind root ball with appropriate material to ensure adequate soil is retained and kept moist prior to transportation and installation
  • 3.5 Lift tree and secure for potential storage or transportation using safe lifting techniques
  • 3.6 Prepare and handle tree or shrub to minimise damage during handling and transportation
4. Replant tree or shrub in new environment
  • 4.1 Provide appropriate drainage to ensure root system survival is maintained according to the needs of the species and conditions of the planting site
  • 4.2 Modify soil according to the cultural requirements of the species
  • 4.3 Plant tree or shrub in prepared hole
  • 4.4 Install plant support devices as instructed
5. Complete transplant operation
  • 5.1 Maintain transplanted plant with regular aftercare activities appropriate to the requirements of the species
  • 5.2 Clean, maintain and store tools and equipment
  • 5.3 Collect waste and dispose of or recycle to minimise damage to the external environment
  • 5.4 Maintain records of transplant
No information
No information
Replaces
State Code National Code Title Type
D7106 AHCPGD204A Transplant small trees Unit of competency
Replaced By
State Code National Code Title Type
ODU70 AHCPGD210 Transplant shrubs and small trees Unit of competency
State Code National Code Title Type
BDE6 AHC20416 Certificate II in Horticulture Qualification
BDE7 AHC21616 Certificate II in Landscaping Qualification