Unit of competency Outline

Date retreived
22/07/2026 4:12 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Lift and shift loads mechanically

Lift and shift loads mechanically

Unit of competency
National Code
ICPSUP2360
State Code
OBQ71
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
06/05/2020
View on TGA
State Implementation and Classification
Approved Date
20/08/2020
Field of Education
030717 - Plant And Machine Operations
Original Release Date
20/08/2020
Nominal Hours
35
Description
This unit describes the skills and knowledge required to lift and shift loads using load shifting and basic lifting equipment.It applies to individuals who perform a range of mainly routine tasks in various sectors of the printing and graphic arts industry, using limited practical skills and fundamental knowledge in a defined context. They generally work under direct supervision.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to move load
  • 1.1 Undertake routine pre-use checks of equipment according to manufacturer specifications and work health and safety (WHS) requirements
  • 1.2 Inspect load and identify load type
  • 1.3 Select load handling method according to weight and shape of load
2. Move loads
  • 2.1 Identify and attach any supplements to load mover according to enterprise and WHS requirements
  • 2.2 Communicate with colleagues to coordinate load movement
  • 2.3 Ground or put down load as required according to WHS requirements
  • 2.4 Detach any supplements from load mover and load
3. Shift loads
  • 3.1 Select load shifting device
  • 3.2 Operate load shifting device according to manufacturer specifications
  • 3.3 Lift load according to requirements for balance, vision of operation and protection of load
  • 3.4 Select and use path of movement according to WHS requirements and enterprise procedures
  • 3.5 Check for obstacles and hazards and monitor path of movement
4. Place loads
  • 4.1 Place loads according to requirements for safety, stability, protection of material and avoidance of on-site hazards
  • 4.2 Remove and secure shifting device as required according to enterprise procedures
No information
No information
Replaces
State Code National Code Title Type
AUN18 ICPSUP235 Lift loads mechanically Unit of competency
AUN88 ICPSUP236 Shift loads mechanically Unit of competency