Unit of competency Outline

Date retreived
22/07/2026 4:27 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Identify and rectify problems in the workplace

Identify and rectify problems in the workplace

Unit of competency
National Code
PPMPRS210
State Code
AXH53
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
06/05/2016
View on TGA
State Implementation and Classification
Approved Date
25/08/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
25/08/2016
Nominal Hours
35
Description
This unit of competency describes the outcomes required to identify and rectify workplace problems in a pulp or paper manufacturing facility. This work typically involves complex integrated equipment and continuous operations.This unit applies to production support operators and technicians who identify and analyse causes of problems, apply solutions on a priority basis and document these activities.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Identify and describe the problem and its effects
  • 1.1. Identify indicators of fault, defect or problem.
  • 1.2. Identify problem and possible causes.
  • 1.3. Describe problem clearly.
  • 1.4. Determine the effect on personal safety, equipment safety, quality and productivity.
  • 1.5. Institute mill procedures where personal safety is identified.
2. Analyse the problem and determine priority of causes
  • 2.1. Determine impact of the problem on machinery performance.
  • 2.2. Consider likelihood of each possible cause occurring.
  • 2.3. Determine own ability to do a quick check on each cause.
  • 2.4. Prioritise possible causes for investigation.
3. Apply possible solutions and review outcomes
  • 3.1. Conduct quick checks if possible.
  • 3.2. Apply possible solutions.
  • 3.3. Review outcome.
  • 3.4. Action next possible solution in prioritised order.
4. Document and report problems and solutions
  • 4.1. Record and report problem and solution according to workplace standard operating procedures.
  • 4.2. Report problem and solution to relevant personal.
No information
No information
Replaces
State Code National Code Title Type
AUY26 FPPPRS210A Identify and rectify problems in the workplace Unit of competency
Replaced By
State Code National Code Title Type
ODT91 PPMPRS301 Identify and rectify operational problems Unit of competency