Unit of competency Outline

Date retreived
22/07/2026 8:15 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Identify and rectify operational problems

Identify and rectify operational problems

Unit of competency
National Code
PPMPRS301
State Code
ODT91
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
10/02/2022
View on TGA
State Implementation and Classification
Approved Date
31/05/2022
Field of Education
030717 - Plant And Machine Operations
Original Release Date
31/05/2022
Nominal Hours
15
Description
This unit of competency describes the outcomes required to identify and analyse causes of operational faults or problems, apply solutions on a priority basis and document the problem-solving process.This unit applies to production operators who respond to predictable and sometimes unpredictable problems that occur working with complex integrated equipment and continuous operations of a pulp and/or paper manufacturing facility.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Identify problem and its effects
  • 1.1 Identify indicators of fault, defect or problem as they occur
  • 1.2 Identify problem and possible causes to be investigated
  • 1.3 Define problem and determine effect on personal safety, equipment safety, quality and productivity
  • 1.4 Implement emergency or safety procedures where personal safety is identified
2. Analyse problem and determine priority of causes
  • 2.1 Determine impact of the problem on machinery performance
  • 2.2 Consider likelihood of each possible cause occurring
  • 2.3 Determine own ability to conduct checks on each cause or refer to technician
  • 2.4 Prioritise possible causes for investigation
3. Apply possible solutions and review outcomes
  • 3.1 Plan and prepare for implementation of possible solutions within own work responsibility
  • 3.2 Select and prepare equipment and resources for the implementation of possible solutions
  • 3.3 Apply required techniques to respond to selected solution according to manufacturer specifications and operating procedures
  • 3.4 Inspect and test system and process to determine whether solution was successful in resolving identified cause
  • 3.5 Action next possible solution in prioritised order until problem is resolved
4. Document and report problems and solutions
  • 4.1 Record operational data and information, problem and solution according to workplace requirements
  • 4.2 Report problems and solutions to relevant personal
No information
No information
Replaces
State Code National Code Title Type
AXH53 PPMPRS210 Identify and rectify problems in the workplace Unit of competency
State Code National Code Title Type
BHM1 PPM30121 Certificate III in Pulp and Paper Operations Qualification