Unit of competency Outline

Date retreived
23/07/2026 6:46 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform complex lathe operations

Perform complex lathe operations

Unit of competency
National Code
MEM07021
State Code
OAW34
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
31/03/2021
View on TGA
State Implementation and Classification
Approved Date
Field of Education
030707 - Metal Fitting, Turning And MacHining
Original Release Date
Nominal Hours
36
Description
This unit of competency defines the skills and knowledge required to perform complex turning operations on a range of materials, including non-standard metals and alloys.Where the selection and use of power tools/hand held operations is required unit MEM18002 Use power tools/hand held operations should also be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication. Band: AUnit Weight: 4
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Set up work on lathe
  • 2.1 Determine sequence of operations, including job set-up, for maximum efficiency to meet job specifications
  • 2.2 Set up work on the lathe to required level of accuracy using precision instruments, including dial test indicators
  • 2.3 Balance work piece when using face plates to ensure accuracy in machining, as required
  • 2.4 Set up work piece to ensure that work piece is free of distortion following completion of machining
3 Select and prepare tooling
  • 3.1 Select tooling, accessories and consumables appropriate to task, specifications and material
  • 3.2 Determine cutting tool modifications required to perform complex turning operations, where appropriate
  • 3.3 Prepare tooling and accessories and modify, as required
  • 3.4 Apply International Standard Organisation (ISO) standards for cutting tools or other appropriate standards to suit cutting parameters
4 Perform complex turning
  • 4.1 Calculate speeds and feeds using appropriate mathematical techniques and reference material
  • 4.2 Undertake complex turning to specifications and workplace procedures
  • 4.3 Measure work piece and verify in accordance with specifications using precision measuring equipment
No information
No information
Replaces
State Code National Code Title Type
W5366 MEM07021B Perform complex lathe operations Unit of competency