Unit of competency Outline

Date retreived
22/07/2026 11:09 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply solid acrylic two-pack materials to vehicle components

Apply solid acrylic two-pack materials to vehicle components

Unit of competency
National Code
AURVTP111
State Code
OCL73
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
13/11/2020
View on TGA
State Implementation and Classification
Approved Date
31/03/2021
Field of Education
030513 - Upholstery And Vehicle Trimming
Original Release Date
31/03/2021
Nominal Hours
48
Description
This unit describes the skills and knowledge required to apply solid acrylic two-pack materials to a variety of vehicle components by spray gun application. This unit involves preparing for the task, selecting and using specialist tools and equipment, mixing and applying automotive paint materials according to manufacturer specifications, and completing workplace processes and documentation.The unit applies to those working in the automotive refinishing industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1 Identify job requirements from workplace instructions
  • 1.2 Identify hazards associated with the work, assess potential risks and implement control measures in line with workplace policies and procedures
  • 1.3 Identify tools, equipment and chemicals required for refinishing activity and establish serviceability according to workplace procedures
2. Carry out application activities
  • 2.1 Mix and apply two-pack materials according to workplace procedures, manufacturer specifications, industry standards and workplace health and safety and environmental requirements
  • 2.2 Dry materials according to workplace procedures
  • 2.3 Check paint finish against manufacturers specifications
  • 2.4 Remove paint surface faults using compounds, polishes and glazes
3. Complete work processes
  • 3.1 Conduct final inspection according to workplace procedures and confirm vehicle is ready for use
  • 3.2 Clear work area and dispose of or recycle materials according to workplace procedures
  • 3.3 Complete documentation according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
AWZ44 AURVTP011 Apply solid acrylic two-pack materials to vehicle components Unit of competency
State Code National Code Title Type
BGA9 AUR32420 Certificate III in Automotive Refinishing Technology Qualification