Unit of competency Outline
Date retreived
23/07/2026 9:36 AM AWST
23/07/2026 9:36 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Apply solid acrylic two-pack materials to vehicle components
Apply solid acrylic two-pack materials to vehicle components
Unit of competency
National Code
AURVTP011
AURVTP011
State Code
AWZ44
AWZ44
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030513 - Upholstery And Vehicle Trimming
Original Release Date
13/07/2016
Nominal Hours
48
Description
This unit describes the performance outcomes required to apply solid acrylic two-pack materials to a variety of vehicle components by spray gun application. It involves preparing for the task, selecting and using specialist tools and equipment, mixing and applying automotive paint materials according to manufacturer specifications, and completing workplace processes and documentation.It applies to those working in the automotive paint refinishing repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to apply solid acrylic two-pack materials
- 1.1 Job requirements are determined from workplace instructions
- 1.2 Application information is accessed and interpreted
- 1.3 Acrylic two-pack materials are selected and inspected for quality
- 1.4 Hazards associated with the work are identified and risks are managed
- 1.5 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
- 1.6 Work is planned to identify solid acrylic two-pack application method, minimise waste, and prevent damage to vehicle
2. Carry out application activities
- 2.1 Two-pack materials are mixed and applied according to paint manufacturer recommended intervals, and safety and environmental requirements, and without causing damage to vehicle system or components
- 2.2 Materials are dried using approved methods and equipment
- 2.3 Paint finish is checked against specifications
- 2.4 Paint surface faults are removed using compounds, polishes and glazes
3. Complete work processes
- 3.1 Final inspection is made to ensure work meets workplace expectations and vehicle or component is presented ready for use
- 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
- 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
- 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WF532 | AURVTP3011 | Apply solid acrylic enamel refinishing materials using two component systems | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OCL73 | AURVTP111 | Apply solid acrylic two-pack materials to vehicle components | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAB9 | AUR32416 | Certificate III in Automotive Refinishing Technology | Qualification |