Unit of competency Outline

Date retreived
22/07/2026 8:10 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Construct padded pelmets

Construct padded pelmets

Unit of competency
National Code
MSFSF2009
State Code
WI624
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030115 - Furniture Upholstery And Renovation
Original Release Date
19/06/2014
Nominal Hours
40
Description
This unit of competency covers cutting, preparing and assembling timber components, attaching padding, fabric and trims to pelmets and where necessary, packaging, labelling and storing products.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify pelmet and padding materials to be used
  • 1.1 Type of pelmet to be padded is identified
  • 1.2 Components of the pelmet requiring padding and specifications for the work are identified from work instructions
  • 1.3 Quality and quantity requirements are identified
2 Prepare for work
  • 2.1 Work health and safety (WHS) requirements, including ergonomic criteria and personal protection needs, are observed throughout the work
  • 2.2 Required tools and materials to complete the work are sourced, collected and checked for suitability
  • 2.3 Fixing devices or adhesives are selected in accordance with specifications or type of padding and headboard
  • 2.4 Required personal protection equipment is located
  • 2.5 Work is planned to conform to quality requirements, minimise time, and economically use materials
  • 2.6 Procedures are identified for checking the quality of the work
3 Cut timber and pad pelmet
  • 3.1 Timber components are measured and cut to required specifications
  • 3.2 Padding and other materials are laid out, and components are assembled and attached using appropriate fastenings, tools and equipment
  • 3.3 Tools and equipment are operated in compliance with workplace procedures and WHS requirements
  • 3.4 Work is monitored to ensure quality of product, including correct finish, operation of any moving parts, and number and fitting of fasteners/brackets
  • 3.5 Problems occurring during work operations are identified and reported following workplace procedures
  • 3.6 Waste quantities are minimised, and re-usable materials are collected and stored following workplace procedures
  • 3.7 Routine maintenance of tools and equipment is carried out according to workplace and manufacturer instructions
  • 3.8 Waste is removed and work area is cleaned following workplace procedures
4 Prepare pelmet for next process
  • 4.1 Completed pelmets are packaged following work requirements
  • 4.2 The package is secured, labelled and stored according to workplace procedures
  • 4.3 Appropriate documentation is completed
No information
No information
Replaces
State Code National Code Title Type
W8765 LMFSF2009B Construct padded pelmets Unit of competency
Replaced By
State Code National Code Title Type
OEL69 MSFSF2019 Construct padded pelmets Unit of competency
State Code National Code Title Type
J725 MSF20113 Certificate II in Furnishing Qualification
J734 MSF30613 Certificate III in Soft Furnishing Qualification