Unit of competency Outline

Date retreived
22/07/2026 1:06 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Construct padded pelmets

Construct padded pelmets

Unit of competency
National Code
MSFSF2019
State Code
OEL69
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
08/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030115 - Furniture Upholstery And Renovation
Original Release Date
19/04/2023
Nominal Hours
40
Description
This unit describes the skills and knowledge required to measure, cut and assemble padded pelmets.Workers with this competency follow established procedures in the soft furnishing industry. No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Establish task requirements and prepare for work
  • 1.1 Determine task requirements from work documentation
  • 1.2 Identify and follow work health and safety requirements
  • 1.3 Identify requirements for measuring, cutting, padding, fixing and finishing to meet task requirements
  • 1.4 Identify type of pelmet and components of pelmet to be padded
  • 1.5 Select tools, devices and materials required to complete task
  • 1.6 Plan work to conform to quality requirements and efficient use of time and to minimise wastage
2. Cut timber and pad pelmet
  • 2.1 Measure, cut and prepare timber components to meet task requirements
  • 2.2 Lay out padding and other materials
  • 2.3 Assemble and attach components using fastenings, tools and equipment to meet task specifications
  • 2.4 Operate tools and equipment in accordance with workplace procedures and work health and safety requirements
3. Finish task
  • 3.1 Monitor work to ensure quality of product and correct finish, operation of any moving parts, and number and fitting of fasteners/brackets
  • 3.2 Identify problems during work operations and report according to workplace procedures
  • 3.3 Minimise waste and collect and store re-usable materials according to workplace procedures
  • 3.4 Perform routine maintenance of tools and equipment according to workplace and manufacturer instructions
  • 3.5 Clean work area according to workplace procedures
4. Complete work for next process
  • 4.1 Package completed pelmets to meet task requirements
  • 4.2 Secure, label and store package according to workplace procedures
  • 4.3 Complete and store required workplace documentation in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WI624 MSFSF2009 Construct padded pelmets Unit of competency
State Code National Code Title Type
BIJ6 MSF20122 Certificate II in Furnishing Qualification