Unit of competency Outline

Date retreived
22/07/2026 9:58 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Tile curved surfaces

Tile curved surfaces

Unit of competency
National Code
CPCCWF3007
State Code
OCP08
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040313 - Ceiling, Wall And Floor Fixing
Original Release Date
01/06/2021
Nominal Hours
80
Description
This unit of competency specifies the skills and knowledge required to tile curved surfaces.It includes the preparation for and tiling of columns and arches.A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without close supervision.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement.Licensing, legislative or certification requirements apply to this unit in some states and territories and users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1 Plan and prepare to tile curved surfaces.
  • 1.1 Read and interpret task work instructions and plan sequence of work.
  • 1.2 Select and use personal protective equipment (PPE) as required for each task stage.
  • 1.3 Plan all work to comply with laws and regulations, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.
  • 1.4 Inspect work site, assess hazards and apply risk controls, including required signage and barricades.
  • 1.5 Select tools and equipment, check for serviceability and report any faults.
  • 1.6 Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.
2 Prepare and tile circular columns.
  • 2.1 Calculate and establish extent of curve.
  • 2.2 Use levelling equipment for intermediate marking to level line set out around the surface.
  • 2.3 Make template/s to form an accurate curve line for tiled surface.
  • 2.4 Calculate a balanced design and cut tiles to size.
  • 2.5 Prepare substrate and compatible adhesive.
  • 2.6 Install tiles to level set out, template curve and specifications.
  • 2.7 Minimise voids in adhesive tile beds.
3 Prepare and tile arches.
  • 3.1 Calculate and establish extent of arch and size of voussoirs at the intrados and the extrados.
  • 3.2 Use levelling equipment and calculate springing line.
  • 3.3 Cut tiles to size using template/s.
  • 3.4 Prepare substrate and compatible adhesive.
  • 3.5 Install voussoirs and returns to set-out.
  • 3.6 Minimise voids in adhesive tile beds.
4 Grout tiles.
  • 4.1 Clean and prepare joints to receive grout.
  • 4.2 Mix and apply grout.
  • 4.3 Clean and polish tiles.
  • 4.4 Protect tiles from damage during remaining construction.
5 Clean up.
  • 5.1 Clear work area and dispose of, reuse or recycle materials.
  • 5.2 Clean, check, maintain and store plant, tools and equipment in accordance with manufacturers’ recommendations.
No information
No information
Replaces
State Code National Code Title Type
W9616 CPCCWF3007A Tile curved surfaces Unit of competency
State Code National Code Title Type
BGE1 CPC31320 Certificate III in Wall and Floor Tiling Qualification