Unit of competency Outline

Date retreived
23/07/2026 4:40 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Carry out equipment and basic rig maintenance

Carry out equipment and basic rig maintenance

Unit of competency
National Code
RIIOGD202D
State Code
WH508
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
28/05/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
28/05/2014
Nominal Hours
40
Description
This unit describes a participant’s skills and knowledge required to apply carry out equipment and basic rig maintenance in Drilling.This unit is appropriate for those working in assistant roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for operations
  • 1.1 Access, interpret and apply rig equipment and maintenance and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify and address potential risks, hazards and environmental issues and implement control measures
  • 1.4 Select the personal protective equipment appropriate for the work activity
  • 1.5 Clarify difficulties in carrying out the instructions with the relevant personnel
  • 1.6 Resolve coordination requirements with others at the site prior to commencing, during and on completion of the work activities and ensure briefings/handover details are read/passed on
  • 1.7 Conform to safe working practices and operational requirements
  • 1.8 Confirm availability of necessary auxiliary equipment
2. Prepare and paint metal surface
  • 2.1 Identify, locate, and wear personal protective equipment
  • 2.2 Prepare surface using correct equipment
  • 2.3 Apply rust remover, rust converter and undercoat
  • 2.4 Mix epoxy, paracryl or other paints in correct proportions
  • 2.5 Mask and protect equipment against overspray
  • 2.6 Apply finishing coat using brush, roller and spray gun
  • 2.7 Clean equipment
3. Assist in maintenance of materials handling equipment
  • 3.1 Identify faults/potential faults and report immediately
  • 3.2 Identify, record in writing and/or report requirement for repair or maintenance
  • 3.3 Perform periodical maintenance on chain blocks and comealongs, ensuring equipment is corrosion free, lubricated and operating freely
  • 3.4 Assist with periodical examination of hooks, shackles, slings and strops for defects, correct marking of SWL and ease of operation
  • 3.5 Maintain equipment
4. Prepare and use solvent solutions and rig wash to clean and maintain work areas in non-slippery condition
  • 4.1 Correctly use hazardous chemicals for cleaning
  • 4.2 Isolate area being washed or provide warning signs to indicate slippery decks
  • 4.3 Prepare and apply solvent solutions and rig wash and ensure work areas is maintained for non-slippery conditions
  • 4.4 Clean equipment correctly and stow on completion
  • 4.5 Clean, preserve and reassess painting equipment
No information
No information
Replaces
State Code National Code Title Type
WB201 RIIOGD202A Carry out equipment and basic rig maintenance Unit of competency
Replaced By
State Code National Code Title Type
OCC65 RIIOGD202E Carry out equipment and basic rig maintenance procedures Unit of competency