Unit of competency Outline

Date retreived
22/07/2026 1:47 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up and dismantle temporary work location and equipment

Set up and dismantle temporary work location and equipment

Unit of competency
National Code
AURM240172B
State Code
D7595
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
21/06/2011
View on TGA
State Implementation and Classification
Approved Date
12/10/2011
Field of Education
030717 - Plant And Machine Operations
Original Release Date
12/10/2011
Nominal Hours
16
Description
This unit of competency describes the skills and knowledge required to set up temporary work location and equipment according to team requirements.It requires the ability to set up and dismantle temporary shelter and equipment storage, layout equipment, erect team promotional signage and set up functional workspace.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare site
  • 1.1. Interpret site information and requirements and confirm with site supervisor/circuit manager
  • 1.2. Consider security and confidentiality issues and select risk management measures
  • 1.3. Identify potential hazards and select risk management measures
  • 1.4. Consider path of movement (obstacles, hazards and safety conditions) in positioning of equipment and tooling and take measures to eliminate hazards
  • 1.5. Observe occupational health and safety (OHS) requirements, including equipment and system isolation requirements, and observe personal protection needs throughout the work
2. Assemble temporary work location
  • 2.1. Unload equipment and tooling from transporters in accordance with team requirements
  • 2.2. Assemble, erect and secure temporary work shelter and associated fittings in accordance with shelter manufacturer/component supplier procedure, team requirements and event supplementary regulations
3. Position equipment and tooling
  • 3.1. Assemble equipment according to manufacturer/component supplier specifications
  • 3.2. Position equipment according to team requirements, OHS requirements, controlling body rules, category rules and supplementary regulations
  • 3.3. Identify, fit and install required protective equipment in accordance with manufacturer/component supplier and team guidelines
  • 3.4. Monitor effectiveness of area layout during use and make recommendations for changes to appropriate persons
  • 3.5. Identify problems with the work area and report to appropriate persons
4. Dismantle temporary work location
  • 4.1. Clean, dismantle and pack temporary work shelter in preparation for transportation in accordance with team procedures
  • 4.2. Account for tooling and equipment and maintain and pack in preparation for transportation in accordance with team procedures
  • 4.3. Load shelter, equipment and tooling on transporters in accordance with team procedures
  • 4.4. Clean and inspect work area for serviceable condition in accordance with local requirements
No information
No information
Replaces
State Code National Code Title Type
W2887 AURM240172A Set up and dismantle temporary work location and equipment Unit of competency
Replaced By
State Code National Code Title Type
WF259 AURMGA2001 Set up and dismantle temporary work location and equipment Unit of competency
State Code National Code Title Type
D539 AUR21011 Certificate II in Motorsport Qualification
D543 AUR30911 Certificate III in Motorsport Qualification