Unit of competency Outline

Date retreived
22/07/2026 6:40 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce composites using pre-pregs

Produce composites using pre-pregs

Unit of competency
National Code
PMBPROD398
State Code
BAI11
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
22/06/2016
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
030305 - Materials Engineering
Original Release Date
05/08/2016
Nominal Hours
30
Description
This unit of competency covers the skills and knowledge required to operate and adjust equipment and processes which use pre-pregs to produce composite product.This unit of competency applies to experienced operators who are required to start up and shut down the equipment, monitor equipment operation, establish a stable process, make adjustments to remedy faults and non-conformity and solve problems within area of responsibility.This unit of competency applies to an experienced operator demonstrating theoretical and technical knowledge and well developed skills in situations that require some discretion and judgement. The operator may work alone or as a member of a team or group and will work in liaison with other shift team members, team leader and supervisor, as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan own work requirements
  • 1.1 Identify equipment and processes used for production process and upstream and downstream operations from production plan or request
  • 1.2 Identify materials required, including additives
  • 1.3 Recognise hazards and follow appropriate hazard control/minimisation methods
  • 1.4 Identify and check emergency stops, guards and controls
  • 1.5 Identify requirements for materials, quality, production and equipment checks
  • 1.6 Identify materials, waste management and housekeeping needs
2 Start up pre-preg process
  • 2.1 Determine equipment requirements
  • 2.2 Adjust control panel to required settings
  • 2.3 Check equipment, raw material and die/tool all match job requirements
  • 2.4 Check materials, pre-pregs, release agents, and so on, are correct
  • 2.5 Discard, or make adjustments to the process for, non-conforming materials
  • 2.6 Set up date, batch and materials markings to specifications, as required
  • 2.7 Complete other pre-start checks in accordance with procedures
  • 2.8 Start up pre-preg process
3 Operate and make adjustments as required to the process
  • 3.1 Operate composites forming equipment, noting key variables
  • 3.2 Monitor controls/displays/terminals for production/process data
  • 3.3 Monitor product/process quality, thickness and integrity to procedures
  • 3.4 Make adjustments to remedy faults and non-conformity to standard as required
  • 3.5 Maintain continuity of process
  • 3.6 Collect and reprocess/discard scrap/waste and other materials in accordance with procedures
  • 3.7 Clean, adjust and lubricate equipment as required
  • 3.8 Pause or stop equipment in an emergency, following procedures
4 Shut down machine to procedures
  • 4.1 Determine type of shutdown
  • 4.2 Select appropriate cleaning method
  • 4.3 Clean efficiently and adequately as required
  • 4.4 Leave machine in appropriate condition and with appropriate locks, tags or notices
  • 4.5 Complete relevant documentation
  • 4.6 Ensure area is clean and clear after the shutdown, in readiness for the next start-up
5 Anticipate and solve problems
  • 5.1 Recognise a problem or a potential problem
  • 5.2 Determine problems needing priority action
  • 5.3 Refer problems outside area of responsibility to appropriate person, with possible causes
  • 5.4 Seek information and assistance as required to solve problems
  • 5.5 Solve problems within area of responsibility
  • 5.6 Follow through items initiated until final resolution has occurred
No information
No information
Replaces
State Code National Code Title Type
W7683 PMBPROD398B Produce composites using pre-pregs Unit of competency
Replaced By
State Code National Code Title Type
ODA47 PMBPROD398E Produce composites using prepregs Unit of competency