Unit of competency Outline

Date retreived
22/07/2026 6:13 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Measure and scale geometric shapes

Measure and scale geometric shapes

Unit of competency
National Code
MSTTF2006
State Code
BAU62
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
04/07/2016
View on TGA
State Implementation and Classification
Approved Date
01/12/2016
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
01/12/2016
Nominal Hours
50
Description
This unit of competency covers the skills and knowledge required to take accurate measurements and related information from customer information or actual objects or structures.The unit of competency applies to taking accurate measurements, scaling shapes and applying related information using manual processes. It may involve interaction with enterprise clients either individually or in collaboration with other personnel from the enterprise. Work may be conducted in operational indoor or outdoor workplacesWork may be conducted in small to large scale enterprises and may involve individual and team activities. Work is performed within defined procedures may require the exercise of discretion and judgement. This unit may be assessed independently or in combination with other relevant units. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Interpret information
  • 1.1 Interpret drawings, sketches or diagrams provided by customer
  • 1.2 Read and apply workplace procedures and instructions
  • 1.3 Read established dimensions from supplied drawings or other information
  • 1.4 Consult customer to identify missing dimensions or other unknown aspects of the product
  • 1.5 Scale drawings or diagrams where necessary to obtain dimensions needed for production
  • 1.6 Select appropriate tools, equipment and resources
2 Obtain relevant dimensions from physical objects
  • 2.1 Use manual measuring and scaling techniques
  • 2.2 Measure and record physical dimensions from buildings, architectural structures, vehicles, caravans, or marine craft, as appropriate
  • 2.3 Calculate or otherwise determine and record angles for future reference
  • 2.4 Identify and determine geometric shapes, establish positions of clear panels and record relevant information
  • 2.5 Apply work health and safety (WHS) practices during the gathering of measurements both on and off site
3 Record and communicate data
  • 3.1 Record and store data using established workplace format and documentation
  • 3.2 Pass on data and associated information to personnel responsible for further action within the organisation
No information
No information
Replaces
State Code National Code Title Type
W7465 LMTTF2006A Measure and scale geometric shapes Unit of competency
Replaced By
State Code National Code Title Type
OEZ31 MSTTF3009 Create drawings for manufactured textile products Unit of competency