Unit of competency Outline

Date retreived
22/07/2026 9:32 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Design basic carton

Design basic carton

Unit of competency
National Code
ICPPRP281
State Code
AUO57
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030103 - Printing
Original Release Date
16/09/2015
Nominal Hours
30
Description
This unit describes the skills and knowledge required to design cartons using and adapting existing templates.It requires the individual to design a basic carton using known templates that meet the job specifications and then produce an accurate sample before the final design is sent for output.It applies to individuals who perform a range of mainly routine tasks in various sectors of the printing and graphic arts industry. They generally work under direct supervision, and use limited practical skills and fundamental knowledge in a defined context.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Assess brief requirements
  • 1.1 All relevant information in the brief is checked, e.g. carton type, dimensions, material
  • 1.2 All relevant requirements of the brief are assessed in line with enterprise specifications
2 Select and modify template
  • 2.1 Appropriate template is selected on the Computer Aided Design (CAD) system
  • 2.2 Height, width and depth and gluing flap dimensions are adjusted according to the client brief
  • 2.3 Requirements for knife setting and stripping in production are checked and position is designed to have correct grain direction and maximise use of material
3 Use plotter to cut sample
  • 3.1 Plotter is set up ready for downloading design
  • 3.2 Cutting and creasing depths are set
  • 3.3 Material is positioned correctly
  • 3.4 Plotter is operated safely according to manufacturer’s specifications and enterprise procedures
  • 3.5 Routine machine maintenance is carried out as required
4 Assemble sample
  • 4.1 Sample is cut by hand
  • 4.2 Cut sample is folded and glued by hand ensuring angles and construction are correct
  • 4.3 Originals and elements are selected, scaled and cropped appropriately to fit allocated grid space
5 Check and adjust design
  • 5.1 Sample is checked to ensure conformance to the client brief
  • 5.2 Design is adjusted if necessary to meet job specifications
6 Output design
  • 6.1 Design is saved ready for downloading to forme cutter
  • 6.2 Design is outputted as keyline for artwork or as film
  • 6.3 Relevant paperwork is completed according to enterprise procedures
No information
No information
Replaces
State Code National Code Title Type
D3121 ICPPP281C Design basic carton Unit of competency